This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.22
In Stock
Questions And Answers for 11025132411
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
20 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jon
November 11, 2019
Using normal cycle with second rinse "on" and fabric softener "on". When do you manually add fabric softener? Does the machine beep when it is time to add softener? Have heard the machine beep when it was ew but have not heard it beep in a long time.-thanks
For model number 11025132411
Good Day Jon. Thank you for your question in regards to your unit (Model Number 11025132411). We will follow up with you via email shortly with some information that may help you. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jay
December 17, 2019
Why does this machine twist and knot clothes i read on the internet that new and improved impeller pt #w10077050 might fix it
For model number 11025132411
Hello Jay and thanks for writing.
Washers Tangled, Twisted, Knotted Clothes. Tangled, twisted or knotted clothes are usually a result of improper sorting of wash loads. ... Avoid putting too many or too few items in the washer. Make sure you set the proper water level for the size load you are doing. We hope this helps. Please contact us anytime.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Stephen
28 days ago
Tub is banging. Out of balance. Walking across the floor during the spin cycle
For model number 11025132411
Hello Stephen, thank you for the question. You may need to replace the suspension rod kit, part number PS12347546. We hope this helps!
Does all but spin out ..when it gets to spin the agitator spins rapidly and drum cannot keep up like its slipping..have inspected all the drive parts underneath and all look good..is there something else between agitator and drum in form of clutch or is it all controlled from underneath? also i ordered new gears and drive belt assembly already should be here sat.
For model number 11025132411
Hello David, Thank you for your inquiry. We have researched the model number you have provided and the drive clutch kit is the same as the washer drive pulley on our site, part# PS10057144. We also recommend checking the transmission gearcase and drive motor. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dorothy
March 8, 2020
Won’t drain and spin
For model number 11025132411
hello Dorothy, Thank you for the question. We suggest testing the Washing Machine Door Lock Assembly,PartSelect Number PS12704713. If you test the blue wire to the white wire for resistance, if it reads 0 ohms then it is in the locked state. If it reads infinite. We hope this helps
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
