EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1081 - Overview

Models starting with 1081

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel & Bushing Assembly – Part Number: 5304532229
$11.99
In Stock
Wheel & Bushing Assembly
★★★★★
★★★★★
(25)
Part #5304532229
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.
ROLLER TUB Gray – Part Number: 5304507405
$27.37
In Stock
ROLLER TUB Gray
★★★★★
★★★★★
(2)
Part #5304507405
Sold individually. Grey in color.
Heating Element Brass Nut – Part Number: 154106202
$16.03
In Stock
Heating Element Brass Nut
★★★★★
★★★★★
(9)
Part #154106202
The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step guide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.
Upper Wheel And Bushing Assembly (Black) – Part Number: 5304535381
$7.64
In Stock
Upper Wheel And Bushing Assembly (Black)
★★★★★
★★★★★
(2)
Part #5304535381
The upper dishrack roller and axel kit comes with two pieces, a wheel and an axle. This kit is made for your dishwasher. Both pieces measure to be roughly one square inch each, they are made entirely of plastic, and are white in color. The purpose of these parts is to allow your dishrack to roll easily on the support rails. This kit is sold individually and contains only one wheel and one axle. Please order the required quantity for your repair. If your dishrack is having trouble rolling in and out you may need replace your rollers and axles.
Single Door Spring – Part Number: 5300809703
$47.24
Special Order
Single Door Spring
★★★★★
★★★★★
(3)
Part #5300809703
NOTE: Sold individually. This door spring is four and a half inches long. It is used for some dishwashers. These springs tend to wear out at the same rate, so you should replace both of your dishwasher door springs at the same time.
Door Gasket – Part Number: 5300809611
No Longer Available
Door Gasket
★★★★★
★★★★★
(13)
Part #5300809611
This tub gasket, also known as a door seal, is used for dishwashers. This one-piece part provides a water-tight seal between the dishwasher tub and door to prevent water leakage. If you find your dishwasher is leaking or the door will not close, replacing the door seal can solve the issue. The measurement for this door seal is 90 1/4 inches long. Remember to unplug the dishwasher from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for installation instructions.
Upper Dishrack Track End Cap – Part Number: 5300809927
$9.78
In Stock
BASKET – Part Number: 5304509753
$45.11
In Stock
BASKET
★★★★★
★★★★★
(3)
Part #5304509753
This is a basket for your dishwasher. It sits in the lower dishrack and holds small utensils during a washing cycle. This basket has six smaller sections where you can separate your cutlery into specific groups. This silverware holder is made entirely of plastic with a crisscross pattern allowing water and small food particles to pass through it during the cleaning process. This model is grey and roughly 14 inches long, about 6 inches high, and almost 4 inches thick.
Dishwasher Wash Impeller – Part Number: 5300809918
$68.86
Special Order
Dishwasher Wash Impeller
Part #5300809918
This electrically operated propeller causes water to flow through your dishwasher's pump. This impeller is located above the dishwasher's mascerator blade.
CLAMP, HOSE – Part Number: 5304538466
$6.55
In Stock
CLAMP, HOSE
Part #5304538466
Access Panel Screw - Black – Part Number: 154419403
$22.97
In Stock
Access Panel Screw - Black
Part #154419403
Sold individually.
Water Inlet Valve – Part Number: 5300809606
No Longer Available
Water Inlet Valve
Part #5300809606
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Exact Part matches for your search term

31500 1967 Opc – Part Number: 1081
$6.40
Special Order
31500 1967 Opc
This part number matches the current model number 1081
Part #1081
BMS10-175 TRIGGER – Part Number: 1081
$47.20
Special Order
BMS10-175 TRIGGER
This part number matches the current model number 1081
Part #1081

Common Symptoms of models starting with 1081

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Rack Roller Missing
379 of 395 people found this instruction helpful.
  • Sandra from Mount Vernon, WA
  • Really Easy
  • Less than 15 mins
Took the roller out of the package, snapped it into place. Less than 15 seconds. Works good as new.
Was this helpful?
Thank you for voting!
Water leaking under the dishwasher
78 of 89 people found this instruction helpful.
  • Dennis from Tryon, NC
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwa sher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.
Was this helpful?
Thank you for voting!
Dishwasher leaked
42 of 47 people found this instruction helpful.
  • Darren from Biddeford, ME
  • Easy
  • 15 - 30 mins
First I noticed that the old gasket had disintergrated along the bottom. Next I removed the the gasket being careful to observe how it was installed. There are these notched areas of the gasket that belong in the lower corners. I think the notches are designed to help hold the gasket in place and make the gasket bend around the corner. The gasket made closing the door very hard at first but after one wash cycle the fit became much more comfortable. The heat probably made the gasket more pliable. Problem solved.
Was this helpful?
Thank you for voting!