My Orders
10696584 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
freezer and refrigerator compartments not cold enough
1 person
found this instruction helpful.
-
Michael from Colorado Springs, CO
- Really Easy
- Less than 15 mins
-
Nutdriver
Used the suggested problem list here to narrow down that the repair was most likely the run capacitor. Poped the new one in and I now have better control of my compartment ranges. I have a temperature gauge in each compartment. Check them every opening of the doors.
Was this helpful?
Thank you for voting!
Freezer occasionally had a temperature alarm.Clicking noise also.
1 person
found this instruction helpful.
-
Barry from FORD CITY, PA
- Really Easy
- Less than 15 mins
Was told capacitor was problem 90% of the time.Capacior was not the problem.Bad start relay.
Was this helpful?
Thank you for voting!
Plugged it in.
1 person
found this instruction helpful.
-
Adam from GLOVERSVILLE, NY
- Really Easy
- Less than 15 mins
-
Nutdriver
Not so good that was not the problem. Fan is not seized and all the lights work and display is not on but lights up as well. No start once plugged back in after 15 minutes of being unplugged. Nothing same no change.
Was this helpful?
Thank you for voting!
no drawer
1 person
found this instruction helpful.
-
Xiaoping from KIRKLAND, WA
- Really Easy
- Less than 15 mins
just insert
Was this helpful?
Thank you for voting!
door Shelf end cap was broken
1 person
found this instruction helpful.
-
Leora O from PIERZ, MN
- Very Easy
- Less than 15 mins
I just snapped it into place. Easy Peasy!!!!
Was this helpful?
Thank you for voting!
No cold
1 person
found this instruction helpful.
-
Jacqueline from LEXINGTON PK, MD
- Very Easy
- Less than 15 mins
-
Nutdriver, Pliers
Like you video
Was this helpful?
Thank you for voting!
My refrigerator would not defrost.
1 person
found this instruction helpful.
-
Eddie from BRONSTON, KY
- Very Easy
- Less than 15 mins
The first part I changed was the defrost timer but it did
not solve the problem, I replaced the bi-metal defrost sensor
and I have the same problem.
I can defrost by turning the clock manually and heater works.
... Read more
problem.
not solve the problem, I replaced the bi-metal defrost sensor
and I have the same problem.
I can defrost by turning the clock manually and heater works.
... Read more
problem.
Read less
Was this helpful?
Thank you for voting!
3 screws
1 person
found this instruction helpful.
-
Michael from SALINA, KS
- Very Easy
- Less than 15 mins
-
Nutdriver
Ice maker fit perfectly over 2 top screws. I tightened them and put the one on the bottom. I was done in less than 10minutes. Everything fit perfectly as expected. Couldn't have been eaiser. Parts Select is my go to online store.
Was this helpful?
Thank you for voting!
compressor not running
1 person
found this instruction helpful.
-
Doug from Lancaster, CA
- Really Easy
- 15 - 30 mins
Removed the access panel on back of unit located the Run Capacitor on the compressor and removed the bad one and put the new one on and pugged refrigerator back in and it started up and works fine now
Was this helpful?
Thank you for voting!
Warm refrigerater
1 person
found this instruction helpful.
-
charles from REDDING, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Followed instructions from ideoo
Was this helpful?
Thank you for voting!
Freezer no longer frost free.
1 person
found this instruction helpful.
-
anthony from NORCROSS, GA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Reviewed Youtube video as a reference. Unplugged refrigerator. Removed old defrost timer. Matched the color of the wiring harness to the diagram that came with the part. Attach new part to wiring harness.
Was this helpful?
Thank you for voting!
Light rocker switch broke and refrigerator light couldn't go on.
2 of 4 people
found this instruction helpful.
-
Cathy from HOPATCONG, NJ
- Very Easy
- Less than 15 mins
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
Was this helpful?
Thank you for voting!
door hinge broke.
2 of 4 people
found this instruction helpful.
-
Bernard from DONALDSONVLLE, LA
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Removed door and replaced bushing bracket was ok.
Was this helpful?
Thank you for voting!
My Crisper Pan was broken so I needed a new one.
2 of 4 people
found this instruction helpful.
-
Debra from Lakewood, CA
- Really Easy
- Less than 15 mins
I ordered a new one waited for the new ones to come in once it did I took out the old ones and replaced them with the new ones. It was simple.
Was this helpful?
Thank you for voting!
Light switch broke
2 of 4 people
found this instruction helpful.
-
Carolee from Spokane Valley, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.
Was this helpful?
Thank you for voting!