10696581 Kenmore Refrigerator - Parts

Sold individually.

The thermostat sensor barrier covers and insulates the temperature control thermostat capillary tube.

Sold individually.

This part keeps the refrigerator at a constant temperature.

This is a 12oz (about 355 ml) can of black spray paint that is compatible with a variety of different home appliances and is used to cover and conceal any visible scuffs, scratches or chips. This can is sold individually, so consider how much paint you need for your appliances prior to placing an order. To use this spray paint, make sure ...Read moreto have the proper personal protective equipment, such as protective glasses or gloves, as well as a respirator. Clean the surface of whatever you are spraying before you begin and shake the can for 1 minute after hearing the internal mixing balls rattle. Do not spray during high heat or humidity, spray at room temperature and in several thin coats to ensure the best adherence.

Sold individually.

This kickplate grille is attached to the bottom of the refrigerator.

This is a terminal cover for the compressor in a refrigerator. This covers the relay and overload switch on the compressor. Once you have gained access to the terminal cover, you will see that the cover is held on by a tension or retaining clip. Simply pop the cover off and replace with the new cover. The cover is made of plastic and is b...Read morelack in color. It measure less than 3 inches long and less than 3 inches wide. This is a genuine replacement part from the original manufacturer.

This part may be longer than necessary. If so, you will have to cut it to the desired length.

This fan blade circulates air over the condenser. It mounts onto the shaft of the condenser fan motor.