106964 Kenmore Refrigerator - Parts

The Whirlpool Refrigerator Grease is a genuine part manufactured by Whirlpool, designed for use in refrigerators. This part is compatible with various Whirlpool refrigerator models, ensuring smooth operation of your appliance. The grease, sometimes referred to as lubricant, plays a vital role in the overall functioning of the refrigerator...Read more. The purpose of this grease is to reduce friction between moving parts within your refrigerator. This helps to minimize wear and tear on these components, thereby extending their lifespan. The exact location and function of this grease may vary depending on the specific model of your refrigerator. If your refrigerator is making unusual noises or not operating as smoothly as it should, it could be an indicator that the grease needs to be replaced. While it's not always easy to determine if the grease is the issue, these symptoms may suggest it's time for a replacement.

This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.

Sold individually.

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.

This compressor mounting kit is a set of components used to secure and support the compressor in refrigerators. The kit is supplied by the original manufacturer, and it includes 4 rubber grommets/bushings and 4 mounting screws. The rubber bushings function as buffers between the compressor and mounting brackets to reduce movement and nois...Read moree from the appliance, and the mounting screws hold the compressor in place to provide additional stability. Over time it is normal for these components to wear down or become damaged or loose, leading to increased vibrations, excessive noise, and potential damage to the compressor and surrounding parts. Disconnect the power supply and remove the rear appliance cover to access the compressor unit. Remove the mounting screws and lift the compressor out of the refrigerator. Carefully remove the rubber bushings off the unit and press the new ones into place. Place the compressor back in the refrigerator and secure it with the new mounting screws. Reattach the rear cover to complete your repair.

7/32 inches.