EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

10689489998 Kenmore Ice Maker - Parts

1 - 12 of 26

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Tube Kit – Part Number: W10823511
$27.36
In Stock
Water Tube Kit
★★★★★
★★★★★
(8)
Part #W10823511
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Complete Ice Cutter Grid Assembly – Part Number: WP2313637
$163.15
In Stock
Complete Ice Cutter Grid Assembly
★★★★★
★★★★★
(14)
Part #WP2313637
The 1-inch squares on this 15-inch OEM cutting grid cut an ice slab into cubes. It is for a freestanding ice maker, so confirm compatibility with your appliance model. Disconnect power before installation, wear work gloves, and reconnect the cutter-grid harness correctly.
Ice Cutting Grid Wire – Part Number: 4387020
$49.50
In Stock
Ice Cutting Grid Wire
★★★★★
★★★★★
(7)
Part #4387020
This ice cutting grid wire separates sheets of ice into cubes in compatible ice makers. The kit contains approximately 10 feet of wire and eight mounting screws. Two kits are needed to replace the wires running in both directions of the grid. A broken wire may leave an ice sheet sitting on the grid without being cut into cubes. Inspect the wire and check the grid harness connection when this happens, since a loose connection can cause similar problems. Follow the kit instructions for fitting and securing the replacement wire. This is an OEM part sourced directly from the manufacturer.
Ice Maker Drain Fastener Cap – Part Number: WP2185696
$34.74
In Stock
Ice Maker Drain Fastener Cap
★★★★★
★★★★★
(4)
Part #WP2185696
This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This piece will fasten to the bottom of the water pan in your ice maker. It keeps the water in the water pan from leaking into your appliance. If your drain cap is loose or broken, the liquid from the water pan will empty and you will have no ice or very thin ice. Make sure when replacing this part to secure the drain cap tightly.
Ice Maker Water Distributor Tube – Part Number: W10863947
$51.61
In Stock
Ice Maker Water Distributor Tube
★★★★★
★★★★★
(1)
Part #W10863947
The water distributor tube distributes water from the reservoir to the evaporator plate.
Water Inlet Valve with Quick Connections - 120V 60Hz – Part Number: W10881366
$91.08
In Stock
Water Inlet Valve with Quick Connections - 120V 60Hz
★★★★★
★★★★★
(5)
Part #W10881366
Control water filling with this ice maker water inlet valve assembly. Its electric coil opens the valve when water is needed and closes it to stop the flow between fills. Quick-connect fittings hold the water lines securely at the valve. A worn or damaged assembly may cause slow filling, reduced ice production, unwanted dripping, or leaks around the housing. Replacing a faulty valve helps restore proper water delivery and shutoff. Unplug the appliance and turn off the water supply before disconnecting tubing or wiring. This is an OEM part sourced directly from the manufacturer.
Ice Maker Screw – Part Number: WP3400884
$7.47
Special Order
Ice Maker Screw
Part #WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
Screw – Part Number: WP489443
$7.47
In Stock
Screw
Part #WP489443
This screw is sold individually.
Reservoir Hose – Part Number: WP2185626
$55.29
On Order
Reservoir Hose
Part #WP2185626
Front or Rear Spacer/Bracket – Part Number: 8201790
$48.45
Special Order
Front or Rear Spacer/Bracket
★★★★★
★★★★★
(1)
Part #8201790
Note: Sold individually. Used with stand-alone ice cube makers.
Screw -  8-32 X 1-1/4 – Part Number: WP488163
$9.62
In Stock
Screw - 8-32 X 1-1/4
Part #WP488163
Sold individually.
Hose, Overflow – Part Number: WP2313890
$62.60
Special Order
Hose, Overflow
Part #WP2313890
1 - 12 of 26