All Installation Instructions for Kenmore Refrigerator 1068672

Crisper post was missing

3 of 6 people found this instruction helpful.

Annette from Coon Rapids, MN
Easy
Less than 15 mins

My refrigerator is about 26 yrs old and the part I received must have been for newer models, but I was able to insert the part into a little rubber part attached to the bottom the refrigerator,

Was this helpful?

Shelves in freezer falling off

2 of 3 people found this instruction helpful.

wendy from palm coast, FL
Really Easy
Less than 15 mins
Screw drivers

Went online with the model number, the part was very easy to find, diagrams helped me to have confidence in the choice. Parts came in two days, tore them open and used a screw driver to replace the broken shelf brackets, replaced shelves, I am a happy camper!!

Was this helpful?

Broke light switch while cleaning

2 of 3 people found this instruction helpful.

Gail from Golden, CO
Really Easy
Less than 15 mins

use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks

Was this helpful?

The plastic water fill tube got cracked when we moved. I called a parts company and they told me they couldn't just sell me the tube I would have to buy a whole kit for about $50 dollars. I decided to glue the tube. It worked for a while then it started leaking. So I thought I would have to buy

3 of 6 people found this instruction helpful.

Joseph from Chesterfield, MO
Really Easy
Less than 15 mins
Screw drivers

I hand screwed the fill tube into the water tube and stuck it into the freezer hole. I screwed the fill tube to the back of the refrigerator.

Thanks so much! You saved me a bundle!!

Was this helpful?

One of the front wheels was broken in half.

1 person found this instruction helpful.

John from INNSBROOK, MO
Very Easy
15 - 30 mins
Nutdriver

Very easy. Left the front of the refrigerator so it is approx. 4 inches of the floor. (used a two by four. Removed the screws (one for each roller). Removed the rollers and replaced with new rollers. Reinstalled the screws with secures the rollers to the refrigerator. Done

Was this helpful?

Broken kickplate retainers

1 person found this instruction helpful.

Joe from STRATFORD, OK
Very Easy
Less than 15 mins
Screw drivers

replaced retainers. remove and replace four(4) phillips screws.

Was this helpful?

Freezer occasionally had a temperature alarm.Clicking noise also.

1 person found this instruction helpful.

Barry from FORD CITY, PA
Really Easy
Less than 15 mins

Was told capacitor was problem 90% of the time.Capacior was not the problem.Bad start relay.

Was this helpful?

Light rocker switch broke and refrigerator light couldn't go on.

2 of 4 people found this instruction helpful.

Cathy from HOPATCONG, NJ
Very Easy
Less than 15 mins

I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.

Was this helpful?

No cold

1 person found this instruction helpful.

Jacqueline from LEXINGTON PK, MD
Very Easy
Less than 15 mins
Nutdriver, Pliers

Like you video

Was this helpful?

Warm refrigerater

1 person found this instruction helpful.

charles from REDDING, CA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers

Followed instructions from ideoo

Was this helpful?

door hinge broke.

2 of 4 people found this instruction helpful.

Bernard from DONALDSONVLLE, LA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers

Removed door and replaced bushing bracket was ok.

Was this helpful?

Connection leaked as tube entered freezer

1 person found this instruction helpful.

Robert from MERRIMACK, NH
Very Easy
15 - 30 mins

Followed video and had one problen, the metal pipe would not release as shown,so I used a hacksaw between the plastic and metal pipe, removing the metal pipe from inside as the video shows. Good instructions.

Was this helpful?

freezer quit working

1 person found this instruction helpful.

Anthony from CIRCLEVILLE, OH
Really Easy
Less than 15 mins
Pliers

replaced relay switch
when I finally got started to do the repair it took 15 minutes my biggest delay was no instructions were sent with the part and it took time to get some

Was this helpful?

Light switch broke

2 of 4 people found this instruction helpful.

Carolee from Spokane Valley, WA
Really Easy
Less than 15 mins
Screw drivers

Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.

Was this helpful?

The Light Socket Burned Out.

5 of 13 people found this instruction helpful.

MATTHEW from STOCKTON, CA
Really Easy
Less than 15 mins

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Was this helpful?

1068672 Kenmore Refrigerator - Instructions