EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1068601340 Kenmore Refrigerator - Instructions

All Instructions for the 1068601340
121 - 135 of 238

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken light switch
0 of 1 people found this instruction helpful.
  • George from North Scituate, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.
Was this helpful?
Thank you for voting!
rocker switch broke off
0 of 1 people found this instruction helpful.
  • STANLEY from OAKLAND, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
disconnected el. power to fridge. pried out broken switch with small screwdriner and pulled out w/water pump pliers. installed new switch and pressed into opening.
Was this helpful?
Thank you for voting!
Internal light did not come on each time the door was opened.
0 of 1 people found this instruction helpful.
  • John from Jefferson Hills, PA
  • Really Easy
  • Less than 15 mins
After disconnecting the electricity. I followed the instructions as indicated in the "HOW TO" article on the website. I used a steel putty knife and pried the light switch out of its retaining hole. I worked the right side the most since this is the side with the retaining clip. After I removed the switch I transferred the two electrical outlets to the new switch and easily snapped it into place. Engaged the electric power and tested the switch.
Was this helpful?
Thank you for voting!
Door Light switch cracked Mounting
0 of 1 people found this instruction helpful.
  • Paul from Hinsdale, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights we re staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Was this helpful?
Thank you for voting!
19 year old light switch broke
0 of 1 people found this instruction helpful.
  • Fred from Watertown, NY
  • Really Easy
  • Less than 15 mins
Great service. Unpluged old switch and pluged in new one. Works great
Was this helpful?
Thank you for voting!
Lights didn't always come on when was opened
0 of 1 people found this instruction helpful.
  • Gary from Jenkintown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.
Was this helpful?
Thank you for voting!
light switch would not work
0 of 2 people found this instruction helpful.
  • Joseph from Destin, FL
  • Really Easy
  • Less than 15 mins
Popped the old one out with a kitchen knife and popped the new one back in. It tool less than 15 seconds!!
Was this helpful?
Thank you for voting!
non-functioning refrigerator lite switch
0 of 2 people found this instruction helpful.
  • Ronald from Billings, MT
  • Really Easy
  • Less than 15 mins
  • Pliers, Wrench set
My owners manual said to unplug fridge from elec outlet, use a kitchen knife to gently pry off the switch plate
(manual had a pictoral example), unclip the two wire, replace with on new switch and replace the switch. Close
door and plug back in. Open door to check that the lite
works. Walla! It did. Thanks!

Sin cerely, Ron Marshall, Billings, MT
Was this helpful?
Thank you for voting!
Noisy defrost timer
0 of 2 people found this instruction helpful.
  • Jeffrey from Little Falls, NY
  • Easy
  • Less than 15 mins
  • Nutdriver
Part # had been replaced with another timer. Original timer had 2 wires coming out of it. Replacement only had 1 wire. Instructions showed 2 options for where to place the wire. I chose option 2 and I guess I was right. Installation took less than 15 minutes and refridge is back to normal. (Quiet)
Was this helpful?
Thank you for voting!
The light went out
0 of 2 people found this instruction helpful.
  • Janet from Flagstaff, AZ
  • Easy
  • Less than 15 mins
  • Screw drivers
I pried the old one out with a screw driver and pushed the new one in. I expected instructions in the box it came in but there were none.
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people found this instruction helpful.
  • Judith from Phoenix, AZ
  • Really Easy
  • Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
The refridgeror side was not cold enough
0 of 2 people found this instruction helpful.
  • Patrick from Sun City, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
it was a simple repair once I located the part I had to replace . I really like your speedy delivery of the part I needed Thank you Pat Crotty
Was this helpful?
Thank you for voting!
noisey fan
0 of 4 people found this instruction helpful.
  • Richard from Morgan, UT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
yup
Was this helpful?
Thank you for voting!
Switch was not working after a repairman had fixed something else
0 of 4 people found this instruction helpful.
  • Jackie from Nova, OH
  • Really Easy
  • Less than 15 mins
Please bear in mind I am 65 years old & it was harder to get up & down off the floor then to change the switch. Was very easy - watched video, unplugged unit. I used the putty knife at the right front corner to work loose, when it came loose had to loose the left side a little. The unit pulled out easily. detached the wired that had a single plug with 2 prongs on it. Attached the plug, pushed new switch into place. There was no way you could place wires on wrong prong. When done, plugged refrigerator back in & checked if working. I CAN SEE THE LIGHT and the food in the freezer now. Thank you for making an easy repair.
Was this helpful?
Thank you for voting!
Water was running into refrig from freezer and ice cream was soft
  • William from Delano, MN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
We wasted time looking for the electrical schematic on our refrigerator (the first step in the instructions). By skipping that and reading further in the instructions, the type of cooling that the refrigerator has can easily be determined by the colors of the wires that go to the defrost timer. You need to know this to set up the timer properly for your specific refrigerator. Had I just started there, the entire repair would have taken less than 10 minutes. Very simple repair and it works like a charm, no more water coming into the refrigerator and the ice cream is rock hard. Glad we didn't have to spend lots on a new appliance. Thanks Part Select.com! BH
Was this helpful?
Thank you for voting!
All Instructions for the 1068601340
121 - 135 of 238