1068534 Kenmore Dehumidifier - Parts

Metallic screw that is less than an inch long. Does not include the plastic washer.

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to ...Read morewear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

This screw is sold individually. Size: 8-32 x 1/4 inch.

Sold individually.

This part is found in your dehumidifier or air conditioner appliance. The dehumidifier reduces the humidity level in your home by pulling in the air through the unit. The condensation then builds up and lands into this bucket. The bucket catches the water that drips from the evaporator. This bucket is dark brown in color and weighs approx...Read moreimately 5 lbs, is 13 inches in length, 5 inches in width, and 9 inches in height. No tools are necessary for its replacement, it simply slides into place. This product is a genuine OEM product that comes directly from the manufacturer.

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.