EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1066698 Kenmore Refrigerator - Instructions

All Instructions for the 1066698
121 - 135 of 463

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drain clogging causing water to leak bottom of fridge
2 of 2 people found this instruction helpful.
  • Ted C from DSRT HOT SPGS, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
After watching videos how to replace went very easy.removed ice maker cut wires replaced switch put back together now working ok so far.
Was this helpful?
Thank you for voting!
OLDER Ice Maker on the fritz
6 of 14 people found this instruction helpful.
  • Eric S from Boca Raton, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Wrench set
Grat help on the phone. We saw repair on YouTube. my wife and I worked it together. It was child's play!! It went beautifully. we were able to "chill out" with ice aplenty!!Thanks...eric
Was this helpful?
Thank you for voting!
Door light switch disintegrated
2 of 2 people found this instruction helpful.
  • Thomas from Roseville, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Very simple fix, remove 3 screws, two connectors to the old switch
Was this helpful?
Thank you for voting!
Replacing the bulb in the freezer side
5 of 11 people found this instruction helpful.
  • Yafa (and David) from Bothell, WA
  • Easy
  • Less than 15 mins
  • Nutdriver
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Was this helpful?
Thank you for voting!
fridge door switch did not work
2 of 2 people found this instruction helpful.
  • stu from richmond, VA
  • Easy
  • Less than 15 mins
  • Socket set
I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.
Was this helpful?
Thank you for voting!
Light didnt go on
3 of 5 people found this instruction helpful.
  • dorotea from staten island, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Was this helpful?
Thank you for voting!
The door shelf brace was missing.
2 of 2 people found this instruction helpful.
  • Gary from COLUMBUS, OH
  • Really Easy
  • Less than 15 mins
I snapped the two end caps into the shelf rail and pushed it into place on the bottom of the inside door.Tolls were not needed as it was a perfect fit.
Was this helpful?
Thank you for voting!
Freezer Bulb failed
3 of 5 people found this instruction helpful.
  • Kevin from SWANVILLE, ME
  • Very Easy
  • Less than 15 mins
Unscrewed bulb from sock .
Replaced with new one . Now working
Was this helpful?
Thank you for voting!
My White Drive Gear was clearly broken
2 of 2 people found this instruction helpful.
  • Debbie from RAINBOW CITY, AL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I used a phillips screw driver, took the old one off, replaced the new one and it worked immediately!!! Didn't have to turn anything off...fixed in 5 minutes for $11. Fantastic Experience and my husband was shocked. No repairman bill.
Was this helpful?
Thank you for voting!
Clear Dairy Door Broken
3 of 5 people found this instruction helpful.
  • Robert from Hemet, CA
  • Really Easy
  • Less than 15 mins
It was simply placing the clear $60.00 door in place. It was a very simple fix, but expensive!
Was this helpful?
Thank you for voting!
install ice maker with all parts for refridgerator with no ice cube hardware on it.
2 of 2 people found this instruction helpful.
  • Vincent from THE VILLAGES, FL
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I followed the directions and it worked.
Was this helpful?
Thank you for voting!
Ice buildup in freezer causing leaking water into fridge section
2 of 2 people found this instruction helpful.
  • Diane from Brighton, MI
  • Very Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
In my case the defrost thermostat was not the problem. Not worth going through the hassle of checking the thermostat as I would have had to cut it out and test it in another freezer (while the food that was in the freezer was being stored elsewhere). I just ended up buying it and replacing it. So, like I said the defrost thermostat was NO T the issue. I ended up getting a drain tube heater strap, and have been keeping my eye on the fridge. It hasn't been long enough to say the strap fixed the problem, but all indications are pointing to that being the case.
Was this helpful?
Thank you for voting!
Crisper drawer rail broken at one end
2 of 2 people found this instruction helpful.
  • MARTY from GREAT FALLS, MT
  • Very Easy
  • 30 - 60 mins
The rail just snapped into place with a light pressure. I worried it would require manipulation or heavy pressure and I would break the end while installing it.
Was this helpful?
Thank you for voting!
Refrigerator coils froze up and 5 weeks later it got stuck in defrost.
2 of 2 people found this instruction helpful.
  • LES from GRAY, TN
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The parts were reasonably priced, shipped promptly and received in a couple of days. I reviewed a YouTube video before starting that was beneficial. Huge savings over retail repair service. A+ replacement parts house and I would highly recommend.
Was this helpful?
Thank you for voting!
ice maker
2 of 2 people found this instruction helpful.
  • Ann from MC CUNE, KS
  • Really Easy
  • 30 - 60 mins
My husband is an appliance man and he did the work.
Was this helpful?
Thank you for voting!
All Instructions for the 1066698
121 - 135 of 463