10660192001 Kenmore Refrigerator - Parts

This bracket is used in conjunction with the ice maker.

This wine rack is for refrigerators. This wine rack organizes bottles in the refrigerator. Follow the instructions in your owner's manual when installing this part.

This is a 12oz (about 355 ml) can of black spray paint that is compatible with a variety of different home appliances and is used to cover and conceal any visible scuffs, scratches or chips. This can is sold individually, so consider how much paint you need for your appliances prior to placing an order. To use this spray paint, make sure ...Read moreto have the proper personal protective equipment, such as protective glasses or gloves, as well as a respirator. Clean the surface of whatever you are spraying before you begin and shake the can for 1 minute after hearing the internal mixing balls rattle. Do not spray during high heat or humidity, spray at room temperature and in several thin coats to ensure the best adherence.

This is a terminal cover for the compressor in a refrigerator. This covers the relay and overload switch on the compressor. Once you have gained access to the terminal cover, you will see that the cover is held on by a tension or retaining clip. Simply pop the cover off and replace with the new cover. The cover is made of plastic and is b...Read morelack in color. It measure less than 3 inches long and less than 3 inches wide. This is a genuine replacement part from the original manufacturer.

This is a grille, but you may also know it as a grate or a toe kick plate and it is for your refrigerator. This part fastens across the bottom of your appliance to allow air flow into your refrigerator. This is important because the air will then cool the condenser. This model is roughly 32 inches long, and 3 inches wide, with 3 horizontal breaks for air flow. This piece is off white and made entirely of plastic.

This wire harness has a flat connector.