EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1064115 Kenmore Refrigerator - Instructions

All Instructions for the 1064115
121 - 135 of 462

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
LED light blinking and going out in fridge
3 of 5 people found this instruction helpful.
  • Dwight from OLIVE BRANCH, MS
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Installed new led light plug and play
Was this helpful?
Thank you for voting!
Crisper shelf glass missing
2 of 2 people found this instruction helpful.
  • Robert from SAUGERTIES, NY
  • Really Easy
  • Less than 15 mins
Removed cheese & cold cut drawer accessing lower crisper drawer glass missing from surrounding frame.
Dropped in glass into grove of crisper frame…Reinstalled (sliding)!above cold cut drawer in its position and the same for crisper drawer..Finished!!!
All good except for $110.00 price tag for a piece of glass
Was this helpful?
Thank you for voting!
Replaced door gasket and hinge closers on Refrigerator door.
2 of 2 people found this instruction helpful.
  • David E from EL SOBRANTE, CA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
I just followed the excellent Video for both parts. The door gasket is tedious but doable, just take a deep breath and press on. Putty knife is handy to push edge of gasket under the plastic lip. The closer devices take 3 minutes - simple R&R. Check the videos - they're pretty clear and detailed.
Was this helpful?
Thank you for voting!
refrigerator door not working properly
2 of 2 people found this instruction helpful.
  • Dennis from MORRO BAY, CA
  • Very Easy
  • 30 - 60 mins
  • Pliers, Socket set
Just as shown on your video.The refrigerator side was not sitting even, clunked and did not seal right. I decided to do.both sides, refrigerator and freezer while I was at it as our refrigerator is about 16 years old. Everything went in easily and saved us a lot of money. Very happy with the parts and repair video. Got the refrigerator n ice and cleaned out while we were at it..Us and the refrigerator are breathing easier now..Yeepppeee....
Was this helpful?
Thank you for voting!
refrigerator not freeze
2 of 3 people found this instruction helpful.
  • edgar from PAWTUCKET, RI
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
i didn't repair replace capacitor, bi metal defrost thermostat and still not freeze also replace light door switch any suggestion thanks
Was this helpful?
Thank you for voting!
Tray missing
2 of 3 people found this instruction helpful.
  • Ouida from LORMAN, MS
  • Really Easy
  • 15 - 30 mins
Simple fix. I watched the video it was great.
Was this helpful?
Thank you for voting!
lights not working
3 of 6 people found this instruction helpful.
  • GARY W from KANSAS CITY, KS
  • Really Easy
  • Less than 15 mins
  • Screw drivers
watch your how to fix ...had to buy main board and second light but i got it fix save me from calling repair man
Was this helpful?
Thank you for voting!
Lights not working or verily lighting up.
3 of 6 people found this instruction helpful.
  • Frederick from GEORGETOWN, IN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Replaced LED light control board plugged refrigerator back in light worked twice circuit board burned up.
Ordered a new cheaper light board installed work fine.
Was this helpful?
Thank you for voting!
wrong draw er frist time
3 of 6 people found this instruction helpful.
  • Glenn from ALEXANDRIA, MN
  • Difficult
  • Less than 15 mins
very good
Was this helpful?
Thank you for voting!
The original drawer had chipped along the glides and would not close properly
3 of 6 people found this instruction helpful.
  • Donald from SENECA, SC
  • Very Easy
  • Less than 15 mins
The refrigerator had to be pulled away from the wall far enough to permit the door to open fully, but no tools were needed and no difficulty was encountered. Removed the old drawer and discarded it. Inserted the new drawer and closed the humidifier vent. Pushed the refrigerator back in place. Job done.
Was this helpful?
Thank you for voting!
The refrigerator was clicking but not turning the compressor on long enough to work. So the freezer was thawing and freezing which froze the drain line completely. Forcing the water to flood the refrigerator.
2 of 3 people found this instruction helpful.
  • Robert from Pleasant Mount, PA
  • Very Easy
  • Less than 15 mins
  • Nutdriver, Pliers
I unplugged the capacitor which allowed access to the on/off relay. Unplugged the old broken one and plugged in the new one. All better.
Was this helpful?
Thank you for voting!
would not come on-replaced thermostats and capacitor would not run--replaced control board runs like new
2 of 3 people found this instruction helpful.
  • Ruben from CORNVILLE, AZ
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
pulled the control panel removed 2 screws holding the board unpluggedwiring harneses plugged in new board mounted it plugged in the fridge and set the thermostats it came on and temps holding for 5 days so far, very pleased with ease of repair and results, very easy.
Was this helpful?
Thank you for voting!
The refridgerator was inhabited by mice - yuck!
2 of 3 people found this instruction helpful.
  • Pamela from Meriden, CT
  • Really Easy
  • 15 - 30 mins
Well the actual repair took just as long to find Partselect online, plug my model# in, find the parts and wait until they came by mail! The bad part was the cleaning of the refridgerator which was in a home that my boyfriend & I bought which had mice running through it! They chewed the crisper drawer and the other drawer was cracked in half. I would definitely come back to your site for any appliance parts in the future! I may be in need of cook top parts, real soon!
Was this helpful?
Thank you for voting!
Cracked drawer bin fronts
2 of 3 people found this instruction helpful.
  • Nancy from HAYWARD, CA
  • Very Easy
  • Less than 15 mins
Slide out the old drawer & slide in the new drawer. No tools required.
Was this helpful?
Thank you for voting!
Broke light switch while cleaning
2 of 3 people found this instruction helpful.
  • Gail from Golden, CO
  • Really Easy
  • Less than 15 mins
use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks
Was this helpful?
Thank you for voting!
All Instructions for the 1064115
121 - 135 of 462