1064115 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The edges of the Meat pan slide were broken.
15 of 18 people
found this instruction helpful.
-
Michael from Bakersfield, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the glides under the edges of the meat pan, remove the old pan, put the new pan in and replaced the glides. I was very pleased with PartSelect. I ordered my part, and it arrived the very next day. I will definitely order my next replacement part thru PartSelect.
Was this helpful?
Thank you for voting!
Freezer light out and refrigerator lights dim
14 of 16 people
found this instruction helpful.
-
Barb from RALEIGH, NC
- Really Easy
- 15 - 30 mins
-
Pliers
I was not able to unplug the refrigerator because it is housed in a built-in. I removed the icemaker and following simple instructions from YouTube was able to pry the cover off the existing part. After a few gentle tugs, I disconnected the pinned wires from the old part. Connecting the new part was a little tricky but I managed with a l
... Read more
ittle contorting. As soon as the pins connected the freezer light as well as the refrig lights came on. It took about 15 minutes to complete.
Read less
Was this helpful?
Thank you for voting!
light inside fridge was flickering and clicking
20 of 35 people
found this instruction helpful.
-
bill from escondido, CA
- Easy
- 15 - 30 mins
-
Nutdriver
tested bulb good ,replaced door switch first(least expensive)then ordered light socket and circuitboard.If clicking sound is heard replace circuitboard first to save on return shipping because the switch and socket where ok
Was this helpful?
Thank you for voting!
bad door gasket
14 of 17 people
found this instruction helpful.
-
William from Palm Coast, FL
- Very Easy
- 30 - 60 mins
watched video. Very easy
Was this helpful?
Thank you for voting!
Cracked Crisper Drawer
13 of 15 people
found this instruction helpful.
-
Jennifer from Salvisa, KY
- Really Easy
- Less than 15 mins
This company is WONDERFUL! I ordered the wrong drawer the first time, but their return process was a snap and the correct drawer arrived the next day. It's great to know that there is someone out there with just about every part you'll need for about any appliance that is truly customer friendly.
Was this helpful?
Thank you for voting!
The refrigerator cannot bring down to the desired temperature
14 of 18 people
found this instruction helpful.
-
Pit Hoong from Westerville, OH
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
That was due to the evaporator blocked by the ice. Check found the defrost timer is okay. The next thing I can think of is to replace the Electronic Control Board which is installed in the fridge side top compartment. Ply open the face cover, remove the nut and screw that secure the EC Board. Pull out the cable, mount the new card and re-
... Read more
connect. So simple. It is back in order.
Read less
Was this helpful?
Thank you for voting!
The lights went very dim one day. They are LED and have 4 diodes in each light bar. Three went out for the freezer and one went out in the fridge at the same time.
12 of 13 people
found this instruction helpful.
-
John from KINGSTON, NY
- Really Easy
- Less than 15 mins
I tried to replace the light in the fridge first but couldn’t get it out (that one has the control board and is very expensive) so a replaced the one in the freezer by prying it off the ceiling. When I plugged the new one in all the other lights came on full power. Strange but I sent the other one back.
Was this helpful?
Thank you for voting!
Old, cracked freezer door gasket
12 of 13 people
found this instruction helpful.
-
Ken from ALBANY, OR
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
This is in a rental house; Refrigerator/freezer has been off for a few weeks so just opened the freezer door and used screwdriver to pry out one corner then pliers to grab and pull old gasket (seal) off. Had the new one laid out overnight to relax it; placed one corner on and then the opposite corner then repeated the other two corners.
... Read more
Positioned the keeper edge plastic all of the way around to place the gasket in the door. Closed the door to check the seal and plugged unit back in. Waited and then checked air temp with hand held IR temp gauge. All checked good, no cold spots anywhere. Piece of cake!
Read less
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 people
found this instruction helpful.
-
Michelle from Richardson, TX
- Really Easy
- Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!
The led lights on the refrigerator side were dim. The light on the freezer side was out.
12 of 14 people
found this instruction helpful.
-
Richard from ACCIDENT, MD
- Really Easy
- 15 - 30 mins
-
Screw drivers
I originally ordered the led light control board but when I hooked it up I still had the same problem. My neighbor checked both door switches with a voltmeter and they were both good. I then ordered the light for the freezer and when hooked up the problem was solved. All lights worked. The freezer light has four tabs that allow it to snap
... Read more
into the roof of the freezer. Those tabs can be hard to see because there isn’t much room. I used a mirror to locate the tabs and a small flat tip screwdriver to push the tab over and removed the light.
Read less
Was this helpful?
Thank you for voting!
Cover Pan Crisper(bottom glass shelf and frame) were broken
13 of 18 people
found this instruction helpful.
-
anthony from ormond beach, FL
- Really Easy
- Less than 15 mins
New part slipped right into the studs and fit perfectly
Was this helpful?
Thank you for voting!
Crisper Pan Side Reales Had Cracked
10 of 11 people
found this instruction helpful.
-
LEVY from HOUSTON, TX
- Easy
- 30 - 60 mins
I just slid the new pan in , partselect has the correct part all the time , I repalced my ice maker once and it took 15 min no problem
Was this helpful?
Thank you for voting!
Broken tray
11 of 15 people
found this instruction helpful.
-
Brian from Los Angeles, CA
- Really Easy
- Less than 15 mins
Remove old tray, replace with new tray.
Simple & easy.
Best part is I ordered on Monday & received on Tuesday!
Simple & easy.
Best part is I ordered on Monday & received on Tuesday!
Was this helpful?
Thank you for voting!
There was no light on in refrig area
12 of 19 people
found this instruction helpful.
-
Lori from Chuluota, FL
- Easy
- Less than 15 mins
-
Screw drivers
Just replaced the switch, but unfortunately that was not the problem; nor was it the bulb....so I am back to square one.
But Parts Select is a great place to order from. Thank you.
But Parts Select is a great place to order from. Thank you.
Was this helpful?
Thank you for voting!
Both parts were broken and required replacement.
12 of 19 people
found this instruction helpful.
-
Patricia from Inglewood, CA
- Easy
- Less than 15 mins
The broken part was removed and new part installed without any trouble.
Other Parts Used:
Was this helpful?
Thank you for voting!