10581-2 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
element broken at contact point
0 of 1 people
found this instruction helpful.
-
MARLENE from EUGENE, OR
- Really Easy
- Less than 15 mins
ordered new surface element and pushed in to conector turned on switch to test and works fine thanks
Was this helpful?
Thank you for voting!
Small burners would not work
0 of 1 people
found this instruction helpful.
-
David from Goodyear, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
ordered parts and disassembled old burners and installed new ones. All the parts were in the box when delivered.
Helping my 80 yr old mother-in-law very happy.
Got parts in for one of her 81st birthday present she was thrilled.
Helping my 80 yr old mother-in-law very happy.
Got parts in for one of her 81st birthday present she was thrilled.
Was this helpful?
Thank you for voting!
Replace Drip Pans on Stove Top
0 of 1 people
found this instruction helpful.
-
Shawn from Lubbock, TX
- Really Easy
- Less than 15 mins
Just removed the old drip pans and then inserted new ones...pretty dog gone easy!
Other Parts Used:
Was this helpful?
Thank you for voting!
original drip pans scrubbed so much-rusted....
0 of 1 people
found this instruction helpful.
-
Jane from Quarryville, PA
- Really Easy
- Less than 15 mins
Took out the original drip pans and set in replacements which I ordered in black enamel.
Slipped right in and look great as the oven door glass is also black. Look like they came with the range.
Slipped right in and look great as the oven door glass is also black. Look like they came with the range.
Other Parts Used:
Was this helpful?
Thank you for voting!
Surface element didn't heat. Cracked.
0 of 1 people
found this instruction helpful.
-
Darlene from New Berlin, WI
- Really Easy
- Less than 15 mins
I simply pulled out the old element. Plugged in
the replacement, which arrived very quickly, and
that was it. I couldn't believe that was all there
was to it. I really loved being able to order the
replacement part online. Intend to order more
replacement parts just to have my stovetop
looking like new ag ... Read more ain.
the replacement, which arrived very quickly, and
that was it. I couldn't believe that was all there
was to it. I really loved being able to order the
replacement part online. Intend to order more
replacement parts just to have my stovetop
looking like new ag ... Read more ain.
Read less
Was this helpful?
Thank you for voting!
plastic canister melted on burner
0 of 1 people
found this instruction helpful.
-
Joel from Avon, OH
- Really Easy
- Less than 15 mins
just plugged it into the socket
Was this helpful?
Thank you for voting!
Needed new electric element
0 of 1 people
found this instruction helpful.
-
Barbara from Richmond, VA
- Really Easy
- Less than 15 mins
A breeze! Part was perfect replacement, snapped in place without tools, and heated almost immediately.
Was this helpful?
Thank you for voting!
Oven door handle end caps broke
4 of 13 people
found this instruction helpful.
-
Danette from Heber City, UT
- Easy
- Less than 15 mins
We were really happy with how quickly the parts we ordered were delivered to us. Replacing the endcaps was quick and easy.
Was this helpful?
Thank you for voting!
Plug-in surface element was covered with a melted on forever microwave plate
0 of 1 people
found this instruction helpful.
-
Lois from Sarver, PA
- Really Easy
- Less than 15 mins
Just put it right into the receptacle. I want to add...we had gone to our local appliance store and brought home a wrong-size unit. Got online and your website came up. It was easy to find the correct part, ordered it and it arrived 3 days later. I have already recommended your website to 2 of my friends. One very good experience!!!
Was this helpful?
Thank you for voting!
the paint started to chip off.
0 of 1 people
found this instruction helpful.
-
vanessa from runnemede, NJ
- Really Easy
- 15 - 30 mins
-
Wrench set
remove the door, removed about six screws and did a clean up on the glass. the replacement part was screwed back in place. so easy
Was this helpful?
Thank you for voting!
metal ends for connecting surface element to stove broke off in the outlet.
0 of 1 people
found this instruction helpful.
-
Elaine from Framingham, MA
- Really Easy
- 15 - 30 mins
-
Pliers
disconnected electricity, used pinch pliers to remove broken ends from connection box and used an already existing element to make sure a new one would work at all. Ordered new one that arrived very quickly and replaced the broken one. After years of taking these in and out for cleaning by outside cleaning help they are bound to break off
... Read more
. I will do the gentle removal from now on.
Read less
Was this helpful?
Thank you for voting!
The stove's burner bowls were dirty and old and the chrome was gone where the cooking drippings had collected under the previous owner's usage.
0 of 2 people
found this instruction helpful.
-
Patty A from Noblesville, IN
- Really Easy
- Less than 15 mins
We simply typed in the model of the range and several selections of replacements came up on your website. We ordered the black porcelain ones to replace the old chrome ones, thinking they might hold up better and be easier to clean. They look great and I really think they WILL be easy to wipe up. Thank you, Part Select! Patty in India
... Read more
na
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Incorrect Burner Bowls
0 of 2 people
found this instruction helpful.
-
Valerie from Corvallis, OR
- Really Easy
- Less than 15 mins
For 12 years I've been suffering with the incorrect burner bowls...I love to cook and it's really irritating when your bowls don't fit correctly. Now, I am amazed at how my burners fit! Thank you! What a Blessing!
Other Parts Used:
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people
found this instruction helpful.
-
Roscoe G from ROCHESTER, NY
- Very Easy
- Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
the center of the element had broken
-
Betty from Fayetteville, WV
- Really Easy
- Less than 15 mins
just pulled the old one out and replaced with new one. very easy
Was this helpful?
Thank you for voting!