Models
>
1042
1042 - Overview
Models starting with 1042
Click on the best match to narrow your results.
- 10420 (5900001-5999999 - 1995) Lawn Boy Lawn Mower (Gold Series Lawnmower)
- 10420 (4900001-4999999 - 1994) Lawn Boy Lawn Mower (Gold Series Lawnmower)
- 10420 (3900001-3999999 - 1993) Lawn Boy Lawn Mower (Gold Series Lawnmower)
- 10420-1 General Electric Range
- 10420-2 General Electric Range
- 10421 (4900001-4999999 - 1994) Lawn Boy Lawn Mower (Gold Series Lawnmower)
- 10421 (3900001-3999999 - 1993) Lawn Boy Lawn Mower (Gold Series Lawnmower)
- 10421-1 General Electric Range
- 10421-2 General Electric Range
- 10421-3 General Electric Range
- 10422 (7900001-7999999 - 1997) Lawn Boy Lawn Mower (Gold Series Lawnmower)
- 10422 (6900001-6999999 - 1996) Lawn Boy Lawn Mower (Gold Series Lawnmower)
- 10424 (9900001-9999999 - 1999) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
- 10424 (8900001-8999999 - 1998) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
- 10424 (240000001-240999999 - 2004) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
- 10424 (230000001-230999999 - 2003) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
- 10424 (220000001-220999999 - 2002) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
- 10424 (210000001-210999999 - 2001) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
- 10424 (200000001-200999999 - 2000) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
- 10425 (8900001-8999999 - 1998) Lawn Boy Lawn Mower (Goldpro Series Lawnmower)
Exact Part matches for your search term
[Viewing 4 of 4]
Sq. Hd. Set Screw 5/16-18 x 5/16
This part number matches the current model number 1042
PartSelect #: PS8826684
Manufacturer #: 1042
No Longer Available
DISCONTINUED
This part number matches the current model number 1042
PartSelect #: PS9385733
Manufacturer #: 1042
No Longer Available
KIT-ROLLER HORSE 1 & 2
This part number matches the current model number 1042
PartSelect #: PS9444430
Manufacturer #: 1042
No Longer Available
Spacer
This part number matches the current model number 1042
PartSelect #: PS11933874
Manufacturer #: 1042
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Burner Bowl - 8 Inch
PartSelect #: PS244399
Manufacturer #: WB31T10015
This part is located beneath the element and catches any spills.
$17.92
In Stock
Burner Bowl - 6 Inch
PartSelect #: PS244398
Manufacturer #: WB31T10014
This burner bowl is also known as a burner drip bowl or burner drip pan, and is designed for use with your cooktop or range. It is black in color and is approximately 6 inches in diameter. It can be f...
$16.56
In Stock
Door Handle End Cap
PartSelect #: PS256613
Manufacturer #: WB7X7183
This oven door handle end cap is used on both the left and right hand sides. Sold individually.
$27.09
In Stock
Door Handle End Cap
PartSelect #: PS228368
Manufacturer #: WB07K10043
This white end cap is sold individually. One cap is required for each end of the oven door handle.
$39.34
In Stock
Filter- A/C Cartridge
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$7.06
On Order
Door Handle
PartSelect #: PS231857
Manufacturer #: WB15K5076
This is the replacement door handle for your range. It is made of black plastic and measures approximately 22 inches by 1 inch. The door handle connects to the range door and allows you to open and cl...
$48.96
In Stock
Door Handle
PartSelect #: PS232098
Manufacturer #: WB15X10018
This is just the handle. The end caps for this handle must be ordered separately if needed.
$35.34
In Stock
Door Handle
PartSelect #: PS232127
Manufacturer #: WB15X10048
Handle only. Screws not included.
$78.31
In Stock
Bulb-Primer
PartSelect #: PS9056413
Manufacturer #: 66-7460
This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as...
$6.57
In Stock
Washer-Stepped
PartSelect #: PS9048394
Manufacturer #: 614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. I...
$3.99
In Stock
Common Symptoms of models starting with 1042
[Viewing 3 of 3]Element will not heat
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The end caps broke on my oven door handle.
1st I opened the oven door and removed the 2 screws that hold the outside and inside of the door together. With the door separated I removed the 2 screws that hold the end caps in place, then removed the old end caps. I put the new end caps on the oven door handle, aligned the holes for the end cap screws and reinstalled the screws,then
... Read more
reinstalled the oven door screws,closed the oven door and started cooking.
Read less
Parts Used:
-
Harry from Thomasville, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
45 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The gasket needed to be replaced in top oven, it was brittle and broken.
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove enti
... Read more
re oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Read less
Parts Used:
-
JoAnn from Auburn, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
19 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle on range was broken
1] removed door and put it on bench
2] removed two[2] screws to open up face of door
3] wedged aa 2" x 4" between face of door and back of door
4] used nut-driver to remove the damaged end-cap [this part holds the stove handle in place]
5] put handle on one side to good end-cap and slipped new end-cap on handle and pu ... Read more t it opening where old end-cap came off
6]screwed in new part and screwed together face and back of oven door
7] put door back on oven
2] removed two[2] screws to open up face of door
3] wedged aa 2" x 4" between face of door and back of door
4] used nut-driver to remove the damaged end-cap [this part holds the stove handle in place]
5] put handle on one side to good end-cap and slipped new end-cap on handle and pu ... Read more t it opening where old end-cap came off
6]screwed in new part and screwed together face and back of oven door
7] put door back on oven
Read less
Parts Used:
-
nancy from rochester, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
15 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!