My Orders
10396 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
broiler element burned out
-
daniel from fort mill, SC
- Really Easy
- Less than 15 mins
-
Pliers
shut off power to range, removed old element, looked up part on line, shopped for best price, Part select was $30 less than sears replacement part, ordered part, part arrived in 4 days, installed new part and I was broling again.
Was this helpful?
Thank you for voting!
Finding a drip pan that fit so that pots could sit level.
-
Ann B from Hueytown, AL
- Really Easy
- Less than 15 mins
Ordered the drip pan from ParSelect.com. Unplugged element and took out old pan. Placed new pan in and replaced element. For the first time in many years, the part fit.
Was this helpful?
Thank you for voting!
Light in oven had blown and needed to be replaced
-
Sandra from Marietta, GA
- Really Easy
- Less than 15 mins
-
Screw drivers
I did not do it, I instead had my neighbor put the gasket around the light lens cover and replace it. He considers himself a handy man, so it was easy for him.
Was this helpful?
Thank you for voting!
drawer coming out of the track and falling to the floor.
-
Steven from Waukesha, WI
- Really Easy
- 15 - 30 mins
-
Screw drivers
pulled drawer out and installed drawer guide
Was this helpful?
Thank you for voting!
Burned Out Broil Element
-
William from Eufaula, AL
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
The repair went ok. I did have to take the back off the stove in order to get to the wire connectors. Needed an extra person to move the stove out of it's location. Just had to be careful.
Was this helpful?
Thank you for voting!
burnt out element
-
chuck from battle creek, MI
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
turn off power, remove 2 screws, lift off of hanger , slide out far enough to unplug wires. remove brackets from old element, I did have to use a screw driver to open up bracket to slide over new element(new element a little larger diameter coil) reverse removal. DONE !! Thank You Part Select !
Was this helpful?
Thank you for voting!