My Orders
- Home
- 1039337261
- Instructions
1039337261 Kenmore Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
drawer coming out of the track and falling to the floor.
-
Steven from Waukesha, WI
- Really Easy
- 15 - 30 mins
-
Screw drivers
pulled drawer out and installed drawer guide
Was this helpful?
Thank you for voting!
Burner was unreliable...would stop working...I had already replaced the burner
-
Lelia from Vienna, VA
- A Bit Difficult
- 15 - 30 mins
-
Pliers, Screw drivers
I did as the video suggested.....I cut the old wires and spliced new ones already attached to the new terminal block. It would have been nice to have some instructions with the parts as I expected one piece but had to connect the wires to the new block and the new metal cover. I was guessing a bit. Also, I needed to use the holder str
... Read more
ip off my old part so that it displaced the new part back far enough to insert the burner connections. That meant finding a screw and nut small enough to allow the metal cover to fit on the block. But the burner works great. I've learned that any repair requires some ingenuity.
Read less
Was this helpful?
Thank you for voting!
the wires were not long enough to use the original path.
-
Ronald L. from Cedaredge, CO
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Screw drivers
the original path was from the right front control knob around the back of the range and left side of range,which i dismantaled to install the new wires to the right front burner. When I found them to be to short I had to also dismantal the right side so the wires could be routed there. The new wires worked fine but did take some extra ti
... Read more
me.
Read less
Was this helpful?
Thank you for voting!