10285 Dynabrade Sander Polisher - Parts

This is a manufacturer sourced replacement seal. It is specially produced for use with Dynabrade sanders. This is one of the seals for the tip valve/inlet bushing. Over time seals tend to shrink and crack allowing for air leaks. At that time it should be replaced to maintain top performance. It is made out of rubber material and it is sol...Read mored individually. Replacing this item you would need a wrench to replace this item.

This an authentic Dynabrade replacement part used in buffers and sanders. The spring is used to absorb shock from the valve when tool is in use. It goes between the air control ring and the tip valve. A wrench may be needed to properly install this part. This item is available as an individual replacement part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Dynabrade sanders. It is an identical replacement for a missing or faulty inlet bushing that the compressor hose would connect to, please make sure to refer to the appropriate diagrams of your model for the correct location and applicati...Read moreon of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This part is genuine and sourced from original manufacturer. It is commonly found in Dynabrade sanders and grinders. A bearing will reduce friction between metal parts resulting in smoother and more effective motion. These are high wear parts that should need regular replacement. Sold individually.

This felt washer is a genuine replacement part supplied by the original equipment manufacturer. It is compatible with over 150 models of Dynabrade sanders. This small flat ring is useful in between bearings of the machine. It is made of felt, and it should be replaced if needed.

The muffler cap attaches to two muffler inserts and the cone muffler. This part is available as an individual replacement part and is an OEM from Dynabrade for use in sanders. It is made out of plastic and will need to be replaced if it breaks. During the replacement process, a screwdriver may be needed to help install the cap.

This is a genuine Dynabrade replacement part for use in sanders. The snap ring fits between the o-ring and the housing. It might require a set of pliers to replace this part if it becomes broken or bent. This item is made of metal and is sold individually.

This replacement lock washer is supplied directly from the original equipment manufacturer, it is specially produced for use with Dynabrade sanders. It helps to distribute the pressure between connected pieces ensuring a tight fit. This is a standard hardware which has multiple applications based on your model, for proper location and use...Read mores please refer to appropriate diagrams of your unit. This part is made of high-quality metal and it is sold individually.

This is a genuine manufacturer-supplied component which is specially made for use with Dynabrade sanders. It is an identical replacement for a missing or faulty screw that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.