1024 - Parts

This is an original Toro replacement part. The breather passage gasket is designed by the manufacturer for use in lawn mowers, engines, motors, and generators. This part is made of flexible plastic, and is used to seal the connection between the breather passage cover and the cylinder. You will require a screwdriver or wrench when replacing this item. This product is sold individually.

This Cotter Pin is a silver 5/32x1-1/4 metal part, sold individually and certified by the original equipment manufacturer. It connects to the axel shaft after the wheel and washer have been installed but before the hub cap. It is used to prevent the wheel from falling off, and if it breaks (due to fatigue) the wheel will fall off. Check...Read more your model number for the correct size of replacement cotter pin to know you are ordering the correct model. This is a one-time use product, which should be replaced during any other repair in which it is disturbed or dislodged.

This control valve, also known as the hydraulic control valve, is designed for use in log splitters. It is sourced from the original equipment manufacturer and allows you to control the movement of the wedge/ram that splits the logs. It also allows you to switch the hydraulic system on/off and adjust the speed and direction of the hydraul...Read moreic cylinder. Over time the valve may become stuck from a buildup of debris and rust, or its handle may malfunction, rendering it unusable. To replace the valve, first disconnect all connections to the old valve. It is common to notice fluid leaking during this repair, simply top it back up once you are done. Place the new control valve in position and secure it with the appropriate screws or fasteners.

This is an OEM part sourced directly from the manufacturer. The rewind guard is commonly found on small engines from Briggs & Stratton. This part is made of high-quality plastic, and is used to cover the starter assembly. This item is sold individually.

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Lawn Boy lawn mowers. The throttle cable controls the engines speed. This part is made of metal and is sold individually. For installation you will need a wrench and screw driver. Make sure that the engine has cooled before you start the repair.

This OEM Cone Bearing, also known as a Tapered Bearing, is a silver, .75 I.D., metal part. Sold individually, it attaches inside the wheel hub, and customers have rated the installation as Medium Difficulty. It is recommended to pack the bearing before installation. This part reduces friction on a moving part, inside of a stationary par...Read moret. When it breaks, you will hear a grinding, growling or squealing sound. It must be replaced when worn or damaged (such as if there are scores on the rollers or on the mandrel).

This is an authentic replacement part, sourced from the original manufacturer for use with hydraulic log splitters. The metal nipple pipe is commonly used to link the hydraulic cylinder and the control valve. This nipple pipe is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic replacement part manufactured for use with walk-behind lawnmowers. The knob is threaded and used to secure the side cover or side discharge chute. This knob does not require tools to install and is sold as an individual replacement part.

This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. This special spring is used to provide compression for the intake and exhaust valves. The spring is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item which is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy lawn mowers. It is an identical replacement for a missing or a damaged cover for the muffler that was originally installed on a new unit. Please refer to the appropriate diagrams for your model to ensure the correct repair. Keep in mind this durable part is sold individually.

The recoil rope attaches to the start handle and is made of a durable material. This authentic item is supplied directly from the original equipment manufacturer for use with lawn mowers and snowthrowers made by Lawn Boy and Toro. This is available as an individual replacement part. During replacement, it may require a screwdriver, a set ...Read moreof pliers, and a wrench to help install this part correctly. It may become broken and will need to be replaced.