1003 - Parts

This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Snowblowers. The chute control cable guide attaches the chute control cables to the chute control lever and guides each cable as the lever is moved. This part is sold individually. Tools you will need for this repair are Pliers and an Adjustable Wrench.

An extension spring is designed to add tension and resistance to different components throughout lawn and garden equipment. This extension spring, also known as an idler spring, is designed for use with the auger within different makes of various lawn and garden equipment like lawnmowers and snowblowers. This spring is approximately 2.5-i...Read morenches long when completely wound and is made of high-quality metal. If you notice that the lever that connects to the auger is loose or has significantly less tension than normal, this spring could be broken or have lost its level of tension, meaning it needs replacing. To replace this spring, you may need a set of pliers, but you simply remove the frame cover over the spring, pull it away from the auger, and carefully pull it off. Then, simply replace that old spring with the new spring.

This snowblower drive belt transfers power from the engine to the wheel drive system, allowing the machine to move forward and backward during operation. Built to handle high torque and cold conditions, it helps maintain consistent traction and smooth engagement. Replacing a worn or slipping belt restores reliable self-propelled movement and proper drive performance.

This metal flange bearing is an authentic manufacturer-sourced component which is designed for use in lawn and garden outdoor equipment. It is bronze in color, with 6 six flat sides, and it has an inner diameter of 0.75 inches, and a height of 1 inch. It also features a protruding circular rim on one end, known as a flange, which keeps th...Read moree bearing stable and secure. The bearing serves as a support mechanism, allowing rotating parts to move smoothly with minimal friction. Over time the bearing may wear down, crack, or fall off causing excessive noise, reduced performance, and potential damage to the snowblower impeller or auger. Use a bearing puller tool to pry the bearing off the equipment. Align the new flange bearing with the mounting holes and secure it in place.

This is a genuine Chapin part made for the sprayers listed below. This poly plastic twist-adjustable nozzle is designed to spray in a cone pattern, creating a wide angled mist. This four-piece item includes one (1) each of: nozzle, O-ring, nozzle base, and valve packing. This assembly is sold individually.

The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil ...Read moreleaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.

This authentic part is supplied by the original equipment manufacturer and is specially designed for use with snowblowers. The extension spring is utilized to apply tension on the auger belt idler arm. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality extension spri...Read moreng is made of durable metal and is sold individually. Make sure to check the diagrams for your model to ensure the proper repair procedure.

This flat idler pulley is designed to help maintain proper belt tension while reducing vibration and uneven wear in lawn and snow equipment drive systems. Made from durable metal for long-lasting performance, it supports smooth belt routing and consistent operation under regular use. Ideal for replacing a worn or noisy pulley, it helps restore reliable belt engagement and overall machine performance.

This item is available as an individual replacement part that has been OEM sourced to be used with snowthrowers from Craftsman. The metal spacer is part of the auger assembly and it is used to separate the auger blades. This item is available as an individual replacement part.

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.