1001- - Overview

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

Genuine Milwaukee replacement part, this item is sold individually. This Chuck Key tightens the jaws of the 1/2 inch capacity Chucks on all the Drill models shown below. For convenience a Chuck Key Holder part number 48-66-4040 can be ordered. It is attached to the power cord then the Chuck Key is attached to it.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the vibration of a working unit, unfortunately, over time it may begin to fail eventually requiring a replacement. Please make sure to refer to...Read more the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality vibe mount with a washer is sold individually.

Genuine Milwaukee replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • 2 Required for a set. • New brushes can restore a motor's electric braking Carbon motor brushes are one of the mos...Read moret commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below. This is a left hand threaded screw, to remove it turn it clockwise. We do have an article and video on

This Trigger switch has 4 internal terminals. This authentic Milwaukee replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches us...Read moree mechanical internals, they tend to degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are:rn • The tool will not start when you use the switch, or it requires multiple tries to turn on, until eventually it refuses to start at all.rn • The variable speed function and electric braking aren't working properly.

This leaf-type spring (also called a flat spring) is sold individually. It is an authentic Porter Cable replacement part.

Have a problem with your dishwasher? Switching out an old or broken sump pump assembly might be just what your appliance needs to work like new again. This genuine Whirlpool assembly can help by keeping everything watertight, making sure water stays where it's supposed to ? inside the sump, underneath your dishwasher tub. A crucial part...Read more, the seal or gasket, is also included. This seal might seem small but plays a big-time role as it prevents the leaking of water between the tub and the sump. Is your dishwasher's brand KitchenAid, Maytag, Jenn-Air, Amana, Inglis, or Magic Chef? Then this part is a good match. But always remember, with any repair, it's safer to unplug your appliance and shut off the water supply before you start - and don't forget your work gloves! With this reliable Whirlpool part, you're not just replacing a component; you're restoring your dishwasher?s efficiency and extending its lifespan. Let's get your dishwasher back to tip-top shape!

Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running moto...Read morer. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This is an authentic OEM part. The Porter Cable knob is compatible with many router devices. The threaded metal with a plastic grip is fitted in the edge guide assembly, securing the edge guide rod. This component is sold individually, and no tools are required for the replacement.