1001-1 (SER 491F) Milwaukee Electric Drill - Overview

Genuine Milwaukee replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • 2 Required for a set. • New brushes can restore a motor's electric braking Carbon motor brushes are one of the mos...Read moret commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below. This is a left hand threaded screw, to remove it turn it clockwise. We do have an article and video on

Have a problem with your dishwasher? Switching out an old or broken sump pump assembly might be just what your appliance needs to work like new again. This genuine Whirlpool assembly can help by keeping everything watertight, making sure water stays where it's supposed to ? inside the sump, underneath your dishwasher tub. A crucial part...Read more, the seal or gasket, is also included. This seal might seem small but plays a big-time role as it prevents the leaking of water between the tub and the sump. Is your dishwasher's brand KitchenAid, Maytag, Jenn-Air, Amana, Inglis, or Magic Chef? Then this part is a good match. But always remember, with any repair, it's safer to unplug your appliance and shut off the water supply before you start - and don't forget your work gloves! With this reliable Whirlpool part, you're not just replacing a component; you're restoring your dishwasher?s efficiency and extending its lifespan. Let's get your dishwasher back to tip-top shape!

This rubber, injection-molded handle is an authentic Milwaukee replacement part. It is used in a many power tools including sanders, nibblers, and polishers. This ergonomic side handle simply twists into/out of place with no tools required. For improved comfort, it can be moved to different locations on a tool easily and quickly. Sold individually.

This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

Genuine Milwaukee replacement part, this item is sold individually. The purpose of the Brush Retaining Screw or Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.

It is an authentic manufacturer approved replacement item that is specially produced for Milwaukee drills. This metal bearing helps to secure intermediate pinion gear while allowing it to spin freely with minimal friction. Over time this part may wear out and restrict movement, if this happens it can easily be replaced. Please note this high quality item is sold individually.

This Woodruff key is supplied directly from the original equipment manufacturer. The metal item is made for use with many power tools. This item is often fitted into the main assembly's split coupler. The key is designed to secure gears and shafts to engine components. Please be sure to refer to the specific manual and diagrams for repair...Read more instructions. This part is sold individually. A wrench, hex key and a screwdriver may be helpful in making the replacement.

This is a genuine Milwaukee part, it is sold individually. The chuck is the top portion of the drill that holds the different drill bits. It is compatible with a variety of drills listed below. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. Thi...Read mores chuck is made of metal. To install this chuck, thread the new chuck assembly onto the spindle. Secure the chuck assembly as tightly as possible( by hand). Open the chuck to accept the retaining screw. Install the retaining screw and secure the screw with a Phillips screwdriver. The screw is reverse-threaded ( requiring counterclockwise rotation to secure.