092J Briggs and Stratton Engine - Parts

The stop switch is made of plastic and metal and helps to turn off the device. This is an authentic replacement part that is sourced from the original manufacturer for use with engines, generators, snowthrowers, and blower-vacuums made by Toro, Murray, and Briggs & Stratton. This part is available individually. During the installation pro...Read morecess, a wrench set and wire stripping pliers might be needed to replace this part. It may become bent or broken and will need to be replaced.

This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A wrench is required for the removal and installation. The magneto armature screw is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

This is a genuine Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The crankcase breather valve opens to relieve pressure in the crankcase. The most common reason for replacing the breather is when the small engine runs poorly. This part is sold individually. Here is a list of tools that are needed to replace...Read more the breather valve a flat-head screwdriver, hammer, 7/16th-inch socket, 3/8th-inch socket or nut driver, Phillips-head screwdriver, 5/16th-inch socket or nut driver, 3/8th-inch socket or nut driver, pliers.

This is a genuine Briggs and Stratton part for use with Lawn and Garden Equipment Engines. The carburetor needle valve seat gasket makes a seal between the needle valve and the base of the carburetor. This part is sold individually. The most common reason for replacing a gasket is if the carburetor is leaking fuel. The tool that you will need to replace the seal gasket is a 10mm socket.

This breather tube is designed for small engines to support proper crankcase ventilation by routing excess pressure, oil mist, and fuel vapors back into the intake system. By preventing pressure buildup inside the engine, it helps promote smooth operation, reduce emissions, and support long-term engine durability. It’s a simple, direct re...Read moreplacement for maintaining reliable performance when a breather tube becomes brittle, clogged, or damaged.

This authentic item is supplied directly from the original equipment manufacturer for use with engines, outboard motors, portable generators, snowthrowers, and lawn mowers made by Briggs & Stratton and Toro. The o-ring seal attaches to the dipstick. When replacing this part a socket set might be required during the installation process. I...Read moret is made out of rubber and will need to be replaced if it breaks. This part is available as an individual replacement.

This is a genuine manufacturer-sourced component which is specially produced for Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a standard hardware that is generally utilized to secure the debris screen guard, please make sure to refer to the appropriate diagrams of your model for the correct location a...Read morend use of this screw. Keep in mind it is a high-quality component which is made of durable metal and is sold individually.

This replacement spark plug boot is an authentic component which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This rubber cap is used to connect the spark plug to the magneto, over time rubber material can dry out and crack even...Read moretually requiring a replacement. Please note this high-quality part is sold individually.

This replacement dipstick is an authentic item which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is secured in the opening on the crankcase allowing a user to check the oil level. It is made of durable metal with a plastic cap and it is sold individually.

This is an original replacement part manufactured for use with Briggs and Stratton small engines. This special gasket seals the crankcase, and is compatible with the engine pump, part number: 590569. It is recommended to replace the gasket when servicing the crankcase to ensure a good seal when the crankcase is reassembled. The gasket is sold individually.

This Flywheel Cup is an OEM direct from Briggs and Stratton for use with lawn and garden equipment engines. The recoil starter cup spins the flywheel to start the engine when you pull the starter rope. The most common reason for replacing the flywheel cup is when the recoil starter will not engage. This part is sold individually. The tool...Read mores that you will need to replace the flywheel cup are a 15/16 inch socket, 5/16 inch socket or nut driver, torque wrench and a mallet.

This is an authentic Briggs & Stratton replacement part, sourced from the original manufacturer for use with small engines. The special fuel tank is used to store fuel on board of the engine. This is a complete part assembly that includes the fuel cap. The fuel tank is available as an individual replacement part.