092501 Briggs and Stratton Engine - Parts

This is a genuine Briggs and Stratton part for use with Engine, Lawn Mowers, Snow Blowers, Leaf Blowers / Vacuums, Tillers, Generators, Lawn Tractors, and Chipper Shredders. The recoil starter ratchet clutch attaches to the starter reel and provides tension against the ratchet when starter rope is being pulled. The most common reason for ...Read morereplacing the recoil starter ratchet clutch is if broken or damaged. This part is sold individually.

This is an authentic OEM component from Briggs & Stratton. The oil drain plug is made for use with many small engines. The metal plug is often fastened into the crankcase cover, and is removed to drain the oil as needed. A hex key or Allen wrench is necessary for the removal and replacement. The oil drain plug is sold individually.

The needle valve spring goes next to the idle mixture valve and is made of metal. This is available as an individual replacement part. This authentic item is supplied directly from the original equipment manufacturer for use with engines, generators, tillers, blower-vacuums, and lawn mowers made by Briggs & Stratton and Toro. During repla...Read morecement, it may require a screwdriver and a wrench set to help install this part correctly. It will require replacing if it becomes bent or broken.

An authentic item that is supplied by the original manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is a high-quality replacement for a faulty or missing oil drain plug that came installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correc...Read moret location and application of this hardware. Keep in mind it is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with small engines. The special wrench is used to fasten and remove the spark plug while maintaining the engine. This spark plug wrench is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine Briggs & Stratton replacement part. The screw is commonly found in yard equipment such as blowers and lawn mowers. This part is made of metal, and may be used in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be ...Read moresure of ordering the correct part. You will require a screwdriver when replacing this item. This part is sold individually.

This is a genuine replacement part that is OEM sourced to be used with lawnmower engines from Briggs & Stratton and Toro. The gasket is used to seal the connection between the body of the crankcase and the cover. It is recommended to replace gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This gasket is sold individually.

This item has been sourced from the original manufacturer to ensure quality. The breather assembly is intended to be used with lawnmower engines from Briggs & Stratton and Toro. The breather assembly attaches to the crankcase. This item is used to allow gasses to escape the crankcase while retaining oil. This assembly includes the breather and the gasket.

This is sold as a kit that contains the bushing and the seal. These are genuine replacement parts sourced from the original manufacturer for use with engines, snowthrowers, lawn mowers, and blower-vacuums made by Briggs & Stratton and Toro. When replacing these items a set of pliers might be required during the installation process. They are made of metal and plastic and will require replacing if they become broken.

This is an authentic replacement part manufactured for use with small engines. The metal cap is used to seal or cover the fill spout on the engine's fuel tank. This fuel tank cap is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal screw is used to secure the muffler deflector or to secure the starter clutch to the flywheel. This item is available as an individual replacement part.