0879 - Parts

This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A wrench is required for the removal and installation. The magneto armature screw is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

This part is an OEM from Briggs & Stratton. The carburetor body gasket is used in many lawn and garden engines. The cardboard composite gasket is fitted onto the carburetor, providing protection from friction and leakage. This item is sold individually, and a screwdriver is required for the installation.

The clutch ball allows the center part of the ratchet to turn backwards freely but catch when turned forward in your engine. This is an OEM part that is made of metal, and it is silver in color. This part will break due to fatigue and wear, and you will know if the part needs replacing if it is no longer able to swing outward to catch t...Read morehe outside of the clutch to start the engine. If this occurs, it is time to replace the clutch ball, which our customers found to be a challenging repair.

This is an authentic manufacturer sourced replacement part designed for use with Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. The carburetor intake gasket which provides an air tight seal for the carburetor. Over time gaskets tend to deteriorate and would need to be replaced. It is made from durable composite material and it is sold individually.

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

This is a geniune OEM part. The Briggs & Stratton, 10-16 amp voltage regulator is composed of metal, wiring and plastic parts. The regulator is compatible with many lawn and garden machines. This part is connected to the engine's terminals, and has been designed to manage the voltage in the device's electrical system. A screwdriver and a ...Read moresocket set are needed in making the removal and repair. It is recommended to refer to the manual and diagrams for repair instructions. This item is sold individually.

The float valve is used to allow fuel into the float chamber when the chamber has been drained and to stop fuel from entering the chamber when it is full. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. This authentic part is supplied by the original equipment manufacturer for use...Read more with Kawasaki engines commonly installed on lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model to ensure the correct repair procedure. Keep in mind this high-quality valve-fuel inlet is sold as an individual item.

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special screw is used with different types of equipment and the application of the screw can vary depending on the model of equipment. This screw is available as an individual replacement part, please see model diagram for part location and usage.

This spark plug terminal is supplied directly from the original equipment manufacturer. The metal terminal is designed to fasten the spark plug to the engine lead wire. This component is sold individually, and needle nose pliers are helpful with the repair. Please refer to the appropriate diagrams of your engine model for the proper application of this hardware.

This is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on lawn and garden equipment. It provides an identical replacement for a missing or a faulty spring-ratchet that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model ...Read morefor the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.