- Home
- 080202-1692-01
- Instructions
080202-1692-01 Briggs and Stratton Engine - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replace fuel diaphragm, fuel pickup tube and air cleaner
7 of 9 people
found this instruction helpful.
-
Gerald from MAULDIN, SC
- Very Easy
- Less than 15 mins
-
Screw drivers, Socket set
This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble.
Other Parts Used:
Was this helpful?
Thank you for voting!
Old diaphragm dried up
6 of 9 people
found this instruction helpful.
-
Steven C from CENTREVILLE, MI
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the ki
... Read more
t but it had what I needed.
Read less
Was this helpful?
Thank you for voting!