0719 Milwaukee - Parts

This is an authentic Milwaukee replacement part, sourced from the original manufacturer for use with reciprocating saws. The special needle bearing is commonly used to reduce friction between a rotating shaft and fixed part assembly. This needle bearing is available as an individual replacement part, please see model diagram for associative parts.

28 volt LITHIUM-ION battery packs power the entire Milwaukee V28 System of power tools. The V28 LITHIUM-ION battery pack offers up to twice the run-time of an 18V NiCd or NiMH pack and is actually lighter than 18V NiCd and NiMH packs! LITHIUM-ION technology allows consistent fade-free power - meaning the first cut is as powerful as the la...Read morest. V28 LITHIUM-ION battery packs will never develop a memory and can be charged at any time regardless of the pack's current charge level! Press the 'fuel gauge' button and LED indicators display remaining charge left in the pack, providing an ideal way to check the state of the pack before you climb onto a roof or up a ladder.

This replacement part is a genuine OEM authorized component which is specially designed for use with Milwaukee sawzall reciprocating saws and rotary hammers. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct use and location of this...Read more item. This part is made of high-quality metal and it is sold individually, note that to remove/install this part you will need snap-ring pliers.

It is a genuine item that is supplied by the original equipment manufacturer for use with Milwaukee power tools. This is a special external retaining ring that helps to secure components on a shaft, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic Milwaukee replacement part manufactured for use with power tools such as angle grinders and sawzalls. The retaining ring is typically used to secure a bearing to a spindle shaft often near a rotary gear. This internal retaining ring is sold as an individual replacement part.

This spindle is an OEM part direct from Milwaukee. Compatible with several Sawzall models, the metal spindle is fitted onto the wobble plate assembly and the front spindle bearing. This component is sold individually. You will need a wrench, pliers and a screwdriver for the repair.

This is a genuine OEM sourced hardware which is specially designed for use with Milwaukee sawzalls. It is utilized to apply pressure on the brush. Unfortunately, over time it may loose tension or get damaged eventually requiring a replacement. Please make sure to refer to the appropriate diagram of your model for the correct location and ...Read moreapplication of this spring. This high-quality component is made of durable metal and is sold individually, keep in mind the brush tube, the spring clip and other parts are all sold separately.

This is an authentic Milwaukee replacement part, sourced from the original manufacturer for use with reciprocating saws. The metal spacer is commonly used to secure the spindle shaft within the diaphragm assembly. This item is available as an individual replacement part, please see illustrated diagram for associative parts.

This service switch is specially designed for Milwaukee sawzall reciprocating saws. It is an authentic item supplied from original manufacturer. It is the main switch that allows user to turn the saw on and off. This assembly includes a plastic trigger and a mechanical switch with two lead wires attached. Replacing this service switch i...Read mores a relatively easy talk that would only require a torx screwdriver. Make sure to check wiring diagram when connecting the switch. • Remove housing screws • Open up the casing • Disconnect wires from the old switch • Remove old switch and secure new one • Reconnect wires • Reassemble and test the unit

This is a genuine replacement part sourced directly from the manufacturer. The lead wire is commonly found in Milwaukee saws and drills. This part is a metal wire with flexible plastic casing, and it is used to carry electric signals from the switch assembly to the machine. You may require a screwdriver and pliers when replacing this item. The lead wire is sold as an individual replacement part.