0518 - Overview

This suction tube is a genuine OEM part used in paint sprayers. It is located in the sprayer container where it is responsible for delivering paint to the sprayer nozzle/gun. The tube is made of plastic and measures approximately 5.5 inches in length. If the tube cracks, becomes clogged or dislodged, it will not be able to pull in or deli...Read morever paint, leading to inconsistent spray patterns. This is a simple repair that does not require the use of any tools. Simply twist the spray painter container off and pull out the old tube. Insert the new suction tube into the container and reassemble the spray painter.

This genuine OEM nozzle seal is a circular rubber gasket used to prevent paint leakages when using spray painters. It seals the area between the nozzle and spray painter body to maintain a steady flow of paint, consistent pressure, and prevent disruption to the atomization process. Over time, the nozzle seal can tear, wear out, or become ...Read moreloose, resulting in paint leakages, inconsistent spray patterns, and decreased pressure. You will need to disassemble the spray gun to access the seal. Once you have located it behind the nozzle, carefully remove it and clean the surrounding area to ensure a good fit for the new seal. Securely position the new seal behind the nozzle and reassemble the spray gun.

The container seal is a genuine item that is supplied by the original equipment manufacturer for use with Wagner paint sprayers. It fits between the spray gun assembly and the suction tube. The seal is made of a thick Styrofoam and helps to keep the paint from leaking out of the spray gun. This item is sold individually.

This 20-foot air hose assembly is a flexible replacement designed to connect the turbine unit to the spray gun on HVLP paint sprayers. It delivers consistent airflow to support smooth and even paint application, helping ensure proper atomization during use. Made from durable materials for dependable performance, it’s well suited for replacing a worn or damaged hose and maintaining reliable sprayer operation.

Paint leaks or poor suction may be caused by a damaged container seal, but the tube and container connection should also be checked. This foam seal fits between the spray gun and suction tube on select sprayers. Use the complete sprayer model number to guarantee the proper fit. The seal is sold as one piece and requires no tools to instal...Read morel. Clean the sealing surfaces, press the new seal evenly into place, and make sure it is not twisted or pinched.

This four-bolt hub kit connects a matching wheel or rotating part to its shaft or axle. Replace the hub if the original body, studs, bolt holes, keyway, or bearing area is cracked, loose, worn, or damaged. The four-bolt pattern alone does not confirm fit. The center opening, bolt spacing, offset, shaft connection, and outside size must al...Read moreso match. Check the equipment manual and review the kit contents before ordering or installation. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing. This is a genuine OEM part sourced from the manufacturer directly.

Clean hydrostatic fluid is maintained by this transmission oil filter, which captures wear material and contamination before the fluid returns through the drive system. It is used on select serviceable hydrostatic transaxles and replaces an earlier filter in compatible applications. Filter quantity and service intervals vary by machine. C...Read moreonfirm the equipment model, serial number, transaxle identification, thread and seal arrangement, required filter quantity, and specified hydraulic fluid before ordering. Follow the equipment manual for draining, refilling, filter tightening, and system purging.