0518080 Wagner Sprayer - Overview

This suction tube is a genuine OEM part used in paint sprayers. It is located in the sprayer container where it is responsible for delivering paint to the sprayer nozzle/gun. The tube is made of plastic and measures approximately 5.5 inches in length. If the tube cracks, becomes clogged or dislodged, it will not be able to pull in or deli...Read morever paint, leading to inconsistent spray patterns. This is a simple repair that does not require the use of any tools. Simply twist the spray painter container off and pull out the old tube. Insert the new suction tube into the container and reassemble the spray painter.

This genuine OEM nozzle seal is a circular rubber gasket used to prevent paint leakages when using spray painters. It seals the area between the nozzle and spray painter body to maintain a steady flow of paint, consistent pressure, and prevent disruption to the atomization process. Over time, the nozzle seal can tear, wear out, or become ...Read moreloose, resulting in paint leakages, inconsistent spray patterns, and decreased pressure. You will need to disassemble the spray gun to access the seal. Once you have located it behind the nozzle, carefully remove it and clean the surrounding area to ensure a good fit for the new seal. Securely position the new seal behind the nozzle and reassemble the spray gun.

This 20-foot air hose assembly is a flexible replacement designed to connect the turbine unit to the spray gun on HVLP paint sprayers. It delivers consistent airflow to support smooth and even paint application, helping ensure proper atomization during use. Made from durable materials for dependable performance, it’s well suited for replacing a worn or damaged hose and maintaining reliable sprayer operation.

This container seal is supplied by the origina equipment manufcaturer for use in paint sprayers. It is a 3.25-inch-wide gasket, made of thick foam that seals the area between the paint container and the sprayer gun. This prevents paint from leaking, and air from entering during operation to allow the paint to flow consistently. for even a...Read morepplication. If the seal wears down, or becomes deformed, it will be unable to adequately seal the connection point leading to uneven spray patterns, poor paint delivery, and paint leakages. Disconnect the spray container from the unit and peel the seal off. Clean the mounting surface thoroughly to ensure a good fit for the new seal. Position the seal on the paint container and press into place. Reattach the container and sprayer gun to complete the repair.

This is an authentic Wagner replacement part. The container is designed by the manufacturer for use in fine finishing sprayers. This part is made of metal, and is used to hold the finish. No tools are required when replacing this item. Simply remove the old part and screw the new one into place. This item is sold individually.

This plastic container is a genuine Wagner replacement part that is specially designed for use with paint sprayers. It is the main container that holds the paint, it has external threads that secure it in the spray gun. Please note the container seal and the tube are both sold separately.

This is an authentic Wagner replacement part manufactured for use with paint sprayers. The special nozzle is used to prevent paint from splashing or dripping and to create an even spray. This nozzle is available as an individual replacement part, please see model diagram for associative parts.

This spray cap is a genuine OEM replacement part supplied by the manufacturer. It is customarily used in Wagner sprayers. This spray cap attaches to the front of the spray gun. It is secured by the nut which is sold separately. This cap is made of plastic and sold individually. It should be replaced if it is cracked or broken. No tools are required to replace this part.