02073 Pressure Washer - Parts

This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wr...Read moreench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.

This water inlet kit delivers a controlled supply of water into the appliance, supporting proper operation during use. Designed for dependable flow and secure connections, it is commonly replaced when water supply issues or leaks occur.

This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A wrench is required for the removal and installation. The magneto armature screw is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.

Frequently referred to as a Vibration Kit, this Vibe Mount Kit includes two durable rubber mounts, two metal washers, two bolts, and two locknuts. This kit is sourced directly from the manufacturer for use in pressure washers and attaches to the base of the unit to reduce vibration when the engine is on. When this part needs to be repla...Read moreced, you will notice more vibrations than normal coming from the unit. This part will become worn through regular use of the machine. You will need a socket set to complete this repair. Customers rate this repair as Easy.

This is a genuine Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The crankcase breather valve opens to relieve pressure in the crankcase. The most common reason for replacing the breather is when the small engine runs poorly. This part is sold individually. Here is a list of tools that are needed to replace...Read more the breather valve a flat-head screwdriver, hammer, 7/16th-inch socket, 3/8th-inch socket or nut driver, Phillips-head screwdriver, 5/16th-inch socket or nut driver, 3/8th-inch socket or nut driver, pliers.

This is a genuine Briggs and Stratton part for use with Lawn and Garden Equipment Engines. The carburetor needle valve seat gasket makes a seal between the needle valve and the base of the carburetor. This part is sold individually. The most common reason for replacing a gasket is if the carburetor is leaking fuel. The tool that you will need to replace the seal gasket is a 10mm socket.

It is an OEM supplied Ez Start kit which is designed for Troy-Bilt and Briggs and Stratton pressure washers. This is a special mechanism which makes starting the engine easier by relieving pressure within the pump head. Unfortunately, over time components may wear out and begin to fail eventually requiring replacement to ensure your equip...Read morement runs properly. Note, this high-quality kit includes multiple parts, to ensure the correct application of these components, refer to the appropriate diagrams for your model. A wrench set will be needed to perform this repair.

This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.

This air cleaner cover is designed to securely protect the engine’s air filter from dirt, dust, and debris, helping maintain proper airflow and consistent engine performance. Made from durable plastic for long-lasting use, it supports reliable operation and helps extend engine life. Ideal for replacing a cracked or missing cover, it restores proper filtration and dependable performance during regular equipment use.

This authentic item is supplied directly from the original equipment manufacturer for use with engines, outboard motors, portable generators, snowthrowers, and lawn mowers made by Briggs & Stratton and Toro. The o-ring seal attaches to the dipstick. When replacing this part a socket set might be required during the installation process. I...Read moret is made out of rubber and will need to be replaced if it breaks. This part is available as an individual replacement.

The OEM E-Ring is a silver metal part used to secure the wheel on the shaft. If broken, the wheel may fall off, and the part must be replaced. It is rated as "Easy" to install and requires pliers and a screw driver.