02027 Pressure Washer - Parts

This kit has been OEM sourced and is intended to be used with pressure washers from Troy-Bilt and Briggs & Stratton. Check valves can become damaged from air entering the inlet or from chemical residue left inside the pump. Damaged valves can prevent water from building up pressure, and if this occurs the valves will need to be replaced. ...Read moreThis kit includes the necessary items to replace damaged valves and the kit is complete.

This is available as a kit that contains all the necessary parts. These are OEM Briggs & Stratton and Troy-Bilt parts directly sourced from the manufacturer for use in pressure washers. They are made out of metal. If these items in the chemical injection kit become broken they will need to be replaced and may require a socket set during the installation.

This Spray Tip Kit is an OEM part direct from Briggs and Stratton for use on a pressure washer. Included are three (3) different spray tips, each tip varies in the spray pattern. For a gentle rinse select the green tip, to scour a surface you will want to use the red tip and to apply detergent the black tip. Each is made of high-quality plastic and metal components.

This replacement trigger gun assembly is specially designed for use with a variety of pressure washers. It is the essential part of the unit that allows user to direct and control the spray. Please note the wand and the hose are both sold separately. This pistol assembly is made out of plastic with metal fittings. This handle is only for pressure washers up to 3000-psi using M22 hose connector.

This is available as a kit that contains sixteen o-rings. They are made of rubber and attach to various parts. These items are original parts from Briggs & Stratton and Troy-Bilt for use in pressure washers. When replacing these parts a set of pliers and a wrench might be required during the installation process. These parts may become broken and will need to be replaced.

This is a genuine OEM replacement part used with many pressure washers. The wheel kit is fitted onto the base assembly. This plastic and metal item is designed to give mobility to the washer. A pair of pliers and a screwdriver are needed for the installation. The wheel kit is sold individually.