My Orders
Mixer Gears
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Shop By Brand
View More
Popular Mixer Gears
Used for Kitchenaid Mixers.
Used for Kitchenaid Mixers.
Installation Instructions
Robert from Minden, NV
Mixer was making clunking sounds and shaking
I removed screws in a sequence that I felt wouldn't further damage the mixer until I had it completely unassembled. When I found the broken worm gear, I went online to find a part. I found an exploded view, but the part numbering was old, and the salesperson couldn't tell me what the worm gear and bracket assembly consisted of, as I only
... Read more
wanted the worm gear. After trying to drive the pin out of the assembly, and failing, I decided to back online and see if anyone else had a photo of the assembly. Luckily (and wisely) PartSelect,com did and that answered any questions I had. The price was better, too. Reassembly of the mixer was a cinch with the exploded view. It's working like new, and we're hoping for another 35 years of service from it! Thanks.
Read less
Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached.
Unplug the mixer before installing this part. Wear work gloves to protect your hands.
Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached.
Unplug the mixer before installing this part. Wear work gloves to protect your hands.
Installation Instructions
WES from BREVARD, NC
Plastic gear housing in stand mixer fractured causing gears to crash
Removed four screws to remove main cover. Removed four more screws to remove fractured plastic gear housing cover. Removed retainer ring and slid two gears and dowel off main shaft. Lifted out remaining gear train and bearings, Removed all grease and metal chips from all components. Greased new gears and reassembled. Replaced plasti
... Read more
c gear housing cover with oreviously purchased die cast replacement part. Assembled main cover.
Read less
Use with stand mixers.
Use with stand mixers.
Installation Instructions
David from Goodlettsville, TN
No action for the attachments for cutting/chopping.
I removed the rear cap, decorative strap, and decorative ring. Next I drove out the pin holding the mixing head. I then removed the 9 screws holding on the motor/gearing portion. This facilitated removal of the gearing from the motor assembly. I next laid in the new gears and calculated what thickness of fiber washers were needed to h
... Read more
old the gears in place. Reassembly was in reverse order of dissassembly.
Read less
This pinion gear is a genuine OEM replacement part for your KitchenAid mixer. The pinion gear is located in the transmission housing and can become worn down over time. To complete this repair, you will need a pair of snap ring pliers to access the housing.
This pinion gear is a genuine OEM replacement part for your KitchenAid mixer. The pinion gear is located in the transmission housing and can become worn down over time. To complete this repair, you will need a pair of snap ring pliers to access the housing.
Installation Instructions
Gary from Plano, TX
Gears Stripped on Stand Mixer
Bought a KitchenAid Pro Series stand mixer from Sam's Club about five years ago. The transmission gears stripped. It is failry easy to replace but you need to replace the worm gear and the pinion at the same time. Make sure all the old grease is removed completely to ensure no old shavings reaming in the transmission housing. Also, if yo
... Read more
u have a fiberglass transmission housing, inspect the housing closely to indetify any hairline fractures and do not fill the transmission assembly with too much grease becasue you need room for the housing to breathe when the unit is in operation. If you fill the housing too much and tighten it, it "WILL" crack the housing. You want enough gree to keep the asssemnly lubricated but not too much that when you run the mixer that it expands and cracks the housing.
Read less
A genuine item that is supplied by the original equipment manufacturer for use with Breville stand mixers. It is an identical replacement for a missing or damaged detachable gear box whisk that was originally included with a new unit. Keep in mind this high-quality component is made of durable plastic and is sold individually, please note the whisk and other parts are all sold separately.
A genuine item that is supplied by the original equipment manufacturer for use with Breville stand mixers. It is an identical replacement for a missing or damaged detachable gear box whisk that was originally included with a new unit. Keep in mind this high-quality component is made of durable plastic and is sold individually, please note the whisk and other parts are all sold separately.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Installation Instructions
joe from monaca, PA
mixer does not mix 4 cups of flour with 6 eggs very easily
sat on the kitchen table and with a screwdriver started to disasemble the mixer,hardest part was taking snap ring off (easy after you buy snap ring pliers)as gears were lifted off noticeable wearing was present on all parts. the bearing housing on the gearcase was broken lose, the only major expense. the other parts are not expensive so i
... Read more
decided to renew all parts. glad i did felt proud of myself when job was done. would do it again Joe
Read less
Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.
Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.
This part is a genuine KitchenAid part. The Internal Gear is used in all six-quart mixers and many five-quart mixers. This Gear is found in the lower portion of the Lower Gear Casing. This Gear drives the Agitator Shaft that turns the mixing attachments such as the Flat Beater. This gear should be replaced when there is significant wear or if any of the teeth have been damaged.
This part is a genuine KitchenAid part. The Internal Gear is used in all six-quart mixers and many five-quart mixers. This Gear is found in the lower portion of the Lower Gear Casing. This Gear drives the Agitator Shaft that turns the mixing attachments such as the Flat Beater. This gear should be replaced when there is significant wear or if any of the teeth have been damaged.
This is available as a set that contains five gears. During the installation process, a screwdriver might be needed to replace these parts. They are made out of plastic and will need to be replaced if they break. These are authentic OEM sourced items which are specially produced for use with Braun multimixes.
This is available as a set that contains five gears. During the installation process, a screwdriver might be needed to replace these parts. They are made out of plastic and will need to be replaced if they break. These are authentic OEM sourced items which are specially produced for use with Braun multimixes.
