KitchenAid Mixer Gears

Videos!

Your Price

$43.18

KitchenAid Mixer Worm Gear & Bracket

★★★★★

21 Reviews

PartSelect Number PS11740516

Manufacturer Part Number WP240309-2

Used for Kitchenaid Mixers.

Fixes these symptoms

Grinding or squealing sound
Touchpad does not respond
See more...

Installation Instructions

Robert from Minden, NV

Mixer was making clunking sounds and shaking

I removed screws in a sequence that I felt wouldn't further damage the mixer until I had it completely unassembled. When I found the broken worm gear, I went online to find a part. I found an exploded view, but the part numbering was old, and the salesperson couldn't tell me what the worm gear and bracket assembly consisted of, as I only wanted the worm gear. After trying to drive the pin out of the assembly, and failing, I decided to back online and see if anyone else had a photo of the assembly. Luckily (and wisely) PartSelect,com did and that answered any questions I had. The price was better, too. Reassembly of the mixer was a cinch with the exploded view. It's working like new, and we're hoping for another 35 years of service from it! Thanks. Read more...

Your Price

$63.64

KitchenAid Mixer Hub Gear

★★★★★

30 Reviews

PartSelect Number PS12348886

Manufacturer Part Number W11192795

Includes both the attachment and beveled gear. This worm follower gear is for stand mixers. Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. Unplug the mixer before installing this part. Wear work gloves to protect your hands.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

WES from BREVARD, NC

Plastic gear housing in stand mixer fractured causing gears to crash

Removed four screws to remove main cover. Removed four more screws to remove fractured plastic gear housing cover. Removed retainer ring and slid two gears and dowel off main shaft. Lifted out remaining gear train and bearings, Removed all grease and metal chips from all components. Greased new gears and reassembled. Replaced plastic gear housing cover with oreviously purchased die cast replacement part. Assembled main cover. Read more...

Your Price

$45.29

KitchenAid Mixer Gear-hub

★★★★★

4 Reviews

PartSelect Number PS12348885

Manufacturer Part Number W11192794

Use with stand mixers.

Installation Instructions

David from Goodlettsville, TN

No action for the attachments for cutting/chopping.

I removed the rear cap, decorative strap, and decorative ring. Next I drove out the pin holding the mixing head. I then removed the 9 screws holding on the motor/gearing portion. This facilitated removal of the gearing from the motor assembly. I next laid in the new gears and calculated what thickness of fiber washers were needed to hold the gears in place. Reassembly was in reverse order of dissassembly. Read more...

Your Price

$6.40

KitchenAid Mixer Stand Pinion Gear

PartSelect Number PS12347635

Manufacturer Part Number W11133646

This pinion gear is a genuine OEM replacement part for your KitchenAid mixer. The pinion gear is located in the transmission housing and can become worn down over time. To complete this repair, you will need a pair of snap ring pliers to access the housing.

Installation Instructions

Gary from Plano, TX

Gears Stripped on Stand Mixer

Bought a KitchenAid Pro Series stand mixer from Sam's Club about five years ago. The transmission gears stripped. It is failry easy to replace but you need to replace the worm gear and the pinion at the same time. Make sure all the old grease is removed completely to ensure no old shavings reaming in the transmission housing. Also, if you have a fiberglass transmission housing, inspect the housing closely to indetify any hairline fractures and do not fill the transmission assembly with too much grease becasue you need room for the housing to breathe when the unit is in operation. If you fill the housing too much and tighten it, it "WILL" crack the housing. You want enough gree to keep the asssemnly lubricated but not too much that when you run the mixer that it expands and cracks the housing. Read more...

Your Price

$20.37

KitchenAid Mixer Gear

PartSelect Number PS12348629

Manufacturer Part Number W11181966

Installation Instructions

joe from monaca, PA

mixer does not mix 4 cups of flour with 6 eggs very easily

sat on the kitchen table and with a screwdriver started to disasemble the mixer,hardest part was taking snap ring off (easy after you buy snap ring pliers)as gears were lifted off noticeable wearing was present on all parts. the bearing housing on the gearcase was broken lose, the only major expense. the other parts are not expensive so i decided to renew all parts. glad i did felt proud of myself when job was done. would do it again Joe Read more...

Your Price

$26.82

KitchenAid Mixer Gear

PartSelect Number PS12712089

Manufacturer Part Number W11340106

This part is a genuine KitchenAid part. The Internal Gear is used in all six-quart mixers and many five-quart mixers. This Gear is found in the lower portion of the Lower Gear Casing. This Gear drives the Agitator Shaft that turns the mixing attachments such as the Flat Beater. This gear should be replaced when there is significant wear or if any of the teeth have been damaged.