Milwaukee Parts

Milwaukee Blade Pulley Tire This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.

Milwaukee Handle Assembly - Single Speed This is an authentic replacement part manufactured for use with Milwaukee impact drivers. The special handle assembly is used to house the switch assembly and motor. This handle assembly includes both sides and is available as an individual replacement part. Please see model diagram for associative parts.

Milwaukee Carbon Brush Assembly Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. ? Worn brushes frequently are the cause behind a motor running poorly. ? Replacing brushes can fix a motor that's operating intermittently. ? New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Milwaukee Brush Assembly Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. Two brushes are needed for the tools shown below. • Worn brushes are often the cause behind a a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.

Milwaukee Shoe Assembly This is a genuine Milwaukee replacement part. It is sold individually for the Milwaukee Sawzalls listed below. The Shoe Assembly helps guide the blade where you want to cut. It is adjustable by pulling down on the 31-52-0090 Shoe Release Lever, for use of longer or shorter blades. The foot pivots for cutting angles. The saw should not be used without this part or it could damage the saw. Part is easily removed and installed with the lever release.

Milwaukee Flange Nut Genuine Milwaukee replacement part, this item is sold individually. This Flange nut is threaded on the spindle of the Milwaukee Grinders shown below. You first place the inner flange on the spindle , part number 43-34-0036. Then you place the grinding wheel of choice on the spindle. The Flange Nut is then threaded on the spindle preferably by using a spanner wrench which fits into the holes of the Flange Nut.

Milwaukee Carbon Brush Assembly This is a genuine Milwaukee replacement part. It is sold as a Set of 2. It includes the brush, brush holder & brush spring. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Milwaukee Inner Disc Flange This is a genuine Milwaukee replacement part, sold individually. The Milwaukee 43-34-0935 Inner Disc Flange is placed on the spindle of the hand held grinder. Its purpose is to secure the grinding wheel to the spindle and act as a support for the grinding wheel, along with the Flange Nut (44-40-0035). This part is compatible with the Milwaukee Grinders that are shown below.

Milwaukee Paddle Trigger Assembly This paddle trigger assembly is supplied by the original manufacturer for use in angle grinders. It allows the user to control the speed and operation of the equipment. The paddle is 5 inches long and 1.25 inches wide. It includes a switch that activates the motor and allows the grinding wheel to spin and a safety lock to prevent accidental starting. If the grinder does not start when you press the switch, stops unexpectedly, has inconsistent speeds, and makes unusual noises when you attempt to use it, the assembly will need to be replaced. Begin by ensuring the equipment is switched off. Remove the fasteners that hold the assembly in place and detach it from the equipment. Position the new assembly on the mounting surface and secure it in place with the appropriate fastener

Milwaukee Pulley Tire This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.