Microwave Knobs
Find your part
Enter your model number or a part number and click "Search"Popular Microwave Knobs
Your Price
$24.46
Button Holder
PartSelect Number PS12114309
Manufacturer Part Number W11116990
This is the button holder for #6 on the diagram.
Fixes these symptoms
- Touchpad does not respond
- Won’t turn on
- See more...
Your Price
$39.32
Knob - Black
PartSelect Number PS8753661
Manufacturer Part Number WB03X21244
This is a control knob for your microwave. The knob is about 1.5 inches in diameter, is black and silver in color, and is sourced directly from the original manufacturer.
Your Price
$24.46
BUTTON
Turn off breaker, unscrew from cabinet, pull out far enough to access 4 tiny star screws (2 each side) line up button and insert into holder, push into hole in glass. Sensor clicks into button holder. Look at other buttons to see alignment. Screw back together Read more...
PartSelect Number PS12070619
Manufacturer Part Number W11086664
Fixes these symptoms
- Touchpad does not respond
- Won’t turn on
- See more...
Installation Instructions
Cecilia from HOUSTON, TX
IKEA Nutid microwave start button stopped working. Gently removed button with ouer edge, saw sensor was disconnected
First - Be certain to order both button and button holder, in same order (I ordered separately, after realizing I would need both, since interlocking, paid 2 delivery charges)Turn off breaker, unscrew from cabinet, pull out far enough to access 4 tiny star screws (2 each side) line up button and insert into holder, push into hole in glass. Sensor clicks into button holder. Look at other buttons to see alignment. Screw back together Read more...
Your Price
$17.44
Your Price
$6.28
Your Price
$6.51
Door Push Button
PartSelect Number PS226790
Manufacturer Part Number WB03X10066
When pushed in, this piece opens the microwave door.
Your Price
$15.19
Your Price
$93.37
Your Price
$37.66
Door Button - Brown
The plastic plunger broke and as long as I had it apart I replaced all plastic pieces associated with the door handle assembly. The door handle had plastic forms for the screws to go into. these plastic forms were also cracked and unusable.
The problem was all due to old brittle plastic failing. The repair was easy and was completed in no time. Read more...
PartSelect Number PS336501
Manufacturer Part Number 313611
Installation Instructions
martin from glendale, AZ
plastic door button plunger broke
I was really delighted that parts are still offered for this model microwave oven, also know as "time master"The plastic plunger broke and as long as I had it apart I replaced all plastic pieces associated with the door handle assembly. The door handle had plastic forms for the screws to go into. these plastic forms were also cracked and unusable.
The problem was all due to old brittle plastic failing. The repair was easy and was completed in no time. Read more...
Button (Stainless Steel)
PartSelect Number PS1486796
Manufacturer Part Number 8206485
Installation Instructions
Nathan from OCEANSIDE, CA
Light and fan buttons not working
The buttons are easy to access. Disconnect the power to the oven then just remove the center grill on top of the microwave then remove the screw attaching the left side grill and remove the grill this will allow access to the upper screw holding the left side panel then open the oven door and use a long slender Torx driver to remove the two screws in the side of the panel then remove the screw holding the left side lamp cover and remove the cover and then remove the left side air intake screen this will allow access to the wiring to the switches and the connector that must be disconnected to allow removal of the side panel, the connector has a small tab that must be depressed to separate the connector, be certain to disconnect the wiring before attempting to remove the side panel as the wiring is too short to allow removal of the side panel while the wiring is connected, after the wiring is disconnected the side panel can be pulled away from the oven it is simply clipped in place and will be removed by pulling it straight toward you after the panel is removed two screws hold the switch circuit board to the side panel, the buttons are part of a fragile plastic tree that is sandwiched between the side panel and the circuit board use care when installing the replacement buttons and circuit board my replacement buttons needed to be reformed by slight hand pressure to make them fit properly. To reassemble just follow the same steps in reverse order. This is a simple operation that can be done in about an hour.
Read more...
