Lawn Mower Control Cables

Lawn Mower Cable-control 37.5

★★★★★

★★★★★

1 Review

This control cable is designed for walk-behind lawn mowers to safely engage and disengage the blade during operation. Constructed with a durable metal inner cable and a protective rubberized outer sheath, it transfers motion from the control handle to the braking mechanism. When the control handle is released, the cable activates the blade brake to stop the blade quickly for added safety. Replacing a worn or broken control cable restores proper blade control, ensures the brake disengages correctly when the lever is pressed, and helps maintain safe, reliable mower operation during routine lawn care.

Lawn Mower Cable-engage W/sea This is an authentic OEM part. The MTD deck engage cable is composed of metal and plastic parts, and has been designed for use in several tractor machines. This part is fastened onto the frame assembly. The deck engage cable works to move belt idler pulley and engage the cutting blades. Please refer to manual for specific repair instructions. A wrench and a screwdriver is helpful in making the replacement. This part is sold individually.

Lawn Mower Engine Control Cable

★★★★★

★★★★★

3 Reviews

This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized protective cover, and a plastic mounting clip. This essential component connects the control handle to the engine brake system, stopping the blade when the handle is released to ensure safe operation. If the cable is broken, the brake may remain engaged even when the lever is pressed. Replacing the cable is a straightforward process that may require a pair of pliers. Begin by identifying where the old cable is attached to the motor assembly and remove it. Install the new cable in the same location, then route it up to the control handle. Insert the Z-shaped end into the hole in the control handle, just as with the original cable. Once both ends are connected, remove the upper mount of the old cable from the handle and secure the new one in its place. Finally, tie the cable in the same manner as the original, ensuring there is enough clearance and free play to prevent over-bending or premature wear. This replacement restores proper blade control and helps maintain safe mower operation.

Lawn Mower Cable

★★★★★

★★★★★

1 Review

Introducing the Husqvarna Engine Zone Control Cable, a vital component for your Husqvarna machines. This Snap-in Control Cable ensures your Husqvarna equipment performs at its peak, providing you the reliability and efficiency you expect from this renowned brand. Harness the power of improved control and superb functionality with this cable. Designed for longevity and durability, this cable guarantees top-notch performance. Boost the functionality of your Husqvarna machine today with this Engine Zone Control cable. Experience the ultimate in control and precision with Husqvarna.

Lawn Mower Cable Traction

★★★★★

★★★★★

1 Review

This cable-traction is sourced directly from the original equipment manufacturer. It is specially designed for use with Toro lawn mowers. The traction cable engages drive wheels on the equipment. Over time it may wear out or get damaged eventually requiring a replacement. It is connected to the bail and then attached to the traction bracket near the transmission. Refer to the owners manual and the appropriate diagrams of your model for the exact location and the correct installation. One durable rubber insulated cable is included. You may need pliers and a wrench set to disconnect the old part and attach the new one.

Lawn Mower Manual Clutch Cable

★★★★★

★★★★★

2 Reviews

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You will need a socket set to replace this part. This part is made of metal, rubber and wire.

Lawn Mower Cable:engagement D

★★★★★

★★★★★

1 Review

This cable is an original part from Craftsman for lawn tractors. This part pivots and pulls the belt idler pulley to fasten the belt and spins the cutting blades. It is recommended that you wear gloves before installing this part. You will need a pliers and a screw driver to replace this part. This cable is made of made of rubber, metal, and wire components.

Lawn Mower Cable Clutch Manual With Spring. Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck. You may need pliers to complete this repair. • First you want to see where the old cable is attached • Just remove the cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Lawn Mower Drive Cable This is an authentic replacement part that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. The drive cable stops the engine when a user lets go of the operator presence handle. When the brake cable is damaged or broken, the mower becomes temporarily inoperable requiring a replacement cable. Please note this high-quality durable rubber insulated cable is sold individually.

Lawn Mower Zone Control Cable

★★★★★

★★★★★

2 Reviews

This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety. This specific part features a 40-inch covered housing with a total cable length of 53 inches, including 13 inches of exposed cable. It is sold individually and includes all necessary components for straightforward replacement. Please note that part number 946-1137 features a fully covered cable with a length of 53 inches. To ensure proper fit and function, carefully compare your existing cable before ordering.