My Orders
Ariens Lawn Mower Control Cables
GET YOUR OFFICIAL Ariens PARTS TO ENSURE VICTORY
Shop By Part Type
View MorePopular Ariens Lawn Mower Control Cables
This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized protective cover, and a plastic mounting clip. This essential component connects the control handle to the engine brake system, stopping the blade when the handle is released to ensure safe operation.
If the cable is broken, the brake may remain engaged even when the lever is pressed. Replacing the cable is a straightforward process that may require a pair of pliers. Begin by identifying where the old cable is attached to the motor assembly and remove it. Install the new cable in the same location, then route it up to the control handle. Insert the Z-shaped end into the hole in the control handle, just as with the original cable. Once both ends are connected, remove the upper mount of the old cable from the handle and secure the new one in its place. Finally, tie the cable in the same manner as the original, ensuring there is enough clearance and free play to prevent over-bending or premature wear. This replacement restores proper blade control and helps maintain safe mower operation.
This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized protective cover, and a plastic mounting clip. This essential component connects the control handle to the engine brake system, stopping the blade when the handle is released to ensure safe operation.
If the cable is broken, the brake may remain engaged even when the lever is pressed. Replacing the cable is a straightforward process that may require a pair of pliers. Begin by identifying where the old cable is attached to the motor assembly and remove it. Install the new cable in the same location, then route it up to the control handle. Insert the Z-shaped end into the hole in the control handle, just as with the original cable. Once both ends are connected, remove the upper mount of the old cable from the handle and secure the new one in its place. Finally, tie the cable in the same manner as the original, ensuring there is enough clearance and free play to prevent over-bending or premature wear. This replacement restores proper blade control and helps maintain safe mower operation.
Installation Instructions
James from ASHTABULA, OH
Cable was broke.
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You will need a socket set to replace this part. This part is made of metal, rubber and wire.
This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You will need a socket set to replace this part. This part is made of metal, rubber and wire.
Made of a durable metal with a plastic cover, this cable is used to control the on/off function of the engine on various lawn mowers. It is not part of a kit or assembly, it is black, and it is sold individually.
When this part is broken or worn, you will be unable to start the engine, at which point it needs to be replaced. No tools are needed to complete this repair.
Customers rated this repair as Easy.
Made of a durable metal with a plastic cover, this cable is used to control the on/off function of the engine on various lawn mowers. It is not part of a kit or assembly, it is black, and it is sold individually.
When this part is broken or worn, you will be unable to start the engine, at which point it needs to be replaced. No tools are needed to complete this repair.
Customers rated this repair as Easy.
Installation Instructions
Frank from AUSTIN, TX
Drive cable broken
Remove the front drive cover and disconnect the old from the drive, hook the new drive cable to the drive, and connect new cable back to the handle. Reinstalled the drive cover, started unit, and test that the drive was working correctly.
It is an authentic OEM sourced replacement part which is specially produced for use with Weed Eater and Poulan walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. It is a high-quality rubber insulated component which is sold individually.
It is an authentic OEM sourced replacement part which is specially produced for use with Weed Eater and Poulan walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. It is a high-quality rubber insulated component which is sold individually.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This part is an OEM from Husqvarna, Poulan and Weed Eater for use with Lawn Tractors. The Interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. The most common reasons for replacing the clutch interlock switch are when the mower won't start or starts when the brake is not depressed. This part is sold individually. The tool that you will need to replace the clutch interlock switch is a -+ inch socket.
This part is an OEM from Husqvarna, Poulan and Weed Eater for use with Lawn Tractors. The Interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. The most common reasons for replacing the clutch interlock switch are when the mower won't start or starts when the brake is not depressed. This part is sold individually. The tool that you will need to replace the clutch interlock switch is a -+ inch socket.
This is an authentic item that is supplied directly from the original equipment manufacturer for use with Ariens walk-behind lawn mowers. The purpose of the traction cable is to engage the drive wheels, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. It is connected to the traction bail and then attached to the traction bracket near the transmission, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated cable is sold individually.
This is an authentic item that is supplied directly from the original equipment manufacturer for use with Ariens walk-behind lawn mowers. The purpose of the traction cable is to engage the drive wheels, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. It is connected to the traction bail and then attached to the traction bracket near the transmission, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality rubber insulated cable is sold individually.
