My Orders
KitchenAid Washer Hinges
GET YOUR OFFICIAL KitchenAid PARTS TO ENSURE VICTORY
Popular KitchenAid Washer Hinges
This gray and white washer lid bumper contains a rubber bottom and is sold individually.
This gray and white washer lid bumper contains a rubber bottom and is sold individually.
Installation Instructions
Nicola from Centreville, MD
Washer would not run, lid switch broken
Repair was easy. Removed two side panels on the control plate. Removed two phillips screws that hold the control panel to the body of the washer. Disconnected the electic connection to the wires leading to the lid switch. Three sided of the lower cover lift over and removed from the washer frame. Access to the lid switch and wire ret
... Read more
ainers was easy. Removed two screws holding the remaining parts of the switch and replaced with new. Re-routed the wires through the retainers. Set the sides back on making sure the set all the way back in the frame and fit properly into the plastic strips on the back of the washer. Reconnected wires, screws and end caps.
Read less
This is the bearing for the lid hinge. Sold individually.
This is the bearing for the lid hinge. Sold individually.
Installation Instructions
Enrique from Miami Shores, FL
spin cycle did not activate
Replaced hinge switch. Still no spin cycle. Noticed hinge bearing cracked & if hinge forced into switch, spin activated. Ordered new hinge bearings.Spin cycle still didn't engage. On further examination, observed that hinge was bent. Straightened hinge & worked like a charm. Didn't really need new switch or bearings. NOTE : Avoid having w
... Read more
asher door bang shut.Took longer than expected, but each procedure was simple.
Read less
Sold individually.
Sold individually.
Installation Instructions
Ellen from NYACK, NY
machine wouldn't turn on when lid closed
replaced missing screw and pad and now machine works perfectly
Hinge only.
Hinge only.
Installation Instructions
Edward from GALLOWAY, NJ
Rusting Washer Lid
Removed existing lid, two hinges and two rubber spacers. Installed new lid and hinges. Spacers were not mentioned on replacement parts needed. Existing spacers in bad shape but reuseable. Would like to have replaced the right and left spacers.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Right Side - This lid hinge is for washers.
Lid hinge connects the lid to the top panel and allows the lid to pivot open and closed.
Wear work gloves to protect your hands when installing this part.
Right Side - This lid hinge is for washers.
Lid hinge connects the lid to the top panel and allows the lid to pivot open and closed.
Wear work gloves to protect your hands when installing this part.
Hinge only.
Hinge only.
Installation Instructions
Edward from GALLOWAY, NJ
Rusting Washer Lid
Removed existing lid, two hinges and two rubber spacers. Installed new lid and hinges. Spacers were not mentioned on replacement parts needed. Existing spacers in bad shape but reuseable. Would like to have replaced the right and left spacers.
