My Orders
Grill Hardware
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Shop By Brand
View More
Popular Grill Hardware
This is a manufacturer approved replacement part designed for use with Char-Broil gas grills. This item is made out of metal and it is sold individually. The carryover tube provides support for the burners, and carries the flame from one burner to the next. They also help to secure the burners in place. Over time, your carryover tubes may rust or warp. This would be the time to replace them. This assembly includes two (2) cotter pins.
This is a manufacturer approved replacement part designed for use with Char-Broil gas grills. This item is made out of metal and it is sold individually. The carryover tube provides support for the burners, and carries the flame from one burner to the next. They also help to secure the burners in place. Over time, your carryover tubes may rust or warp. This would be the time to replace them. This assembly includes two (2) cotter pins.
When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.
When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.
It is an authentic OEM supplied replacement item that is specially produced for use with Char-Broil grills. This is the clip that helps to secure the grease cup which is sold separately. Please note this durable metal item is sold individually.
It is an authentic OEM supplied replacement item that is specially produced for use with Char-Broil grills. This is the clip that helps to secure the grease cup which is sold separately. Please note this durable metal item is sold individually.
This is a genuine Char-Broil replacement part, sold individually. Stainless steel carryover tube. Tube channel measures 4-3/4" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins. Carryover tubes connect the gas grill burners and carry the flame from one burner to the next. Over time, your carryover tubes may rust or warp. This would be the time to replace them.
This is a genuine Char-Broil replacement part, sold individually. Stainless steel carryover tube. Tube channel measures 4-3/4" long. (this measurement does not include the mounting tabs). Comes with 2 cotter pins. Carryover tubes connect the gas grill burners and carry the flame from one burner to the next. Over time, your carryover tubes may rust or warp. This would be the time to replace them.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
A burner with uneven flames or poor heating may have a dirty, damaged, or incorrectly placed burner cap. This black cap covers a high-output burner head and helps guide the flame outward for steady heat. First, let the cooktop cool and remove any grease or food blocking the burner openings. Dry every surface completely and reseat the cap before testing. Replacement may be needed if the cap is chipped, bent, corroded, or no longer rests evenly. Match the new cap to the appliance model and burner location because similar caps can differ. Stop using the cooktop and shut off the gas supply if you detect a gas odor.
A burner with uneven flames or poor heating may have a dirty, damaged, or incorrectly placed burner cap. This black cap covers a high-output burner head and helps guide the flame outward for steady heat. First, let the cooktop cool and remove any grease or food blocking the burner openings. Dry every surface completely and reseat the cap before testing. Replacement may be needed if the cap is chipped, bent, corroded, or no longer rests evenly. Match the new cap to the appliance model and burner location because similar caps can differ. Stop using the cooktop and shut off the gas supply if you detect a gas odor.
Sold individually.
Sold individually.
Installation Instructions
Peter from WRENTHAM, MA
Kenmore 80 Series Washer - Agitator Stopped Working
First I screamed at the ceiling, because I have a three year old and an infant, and the washing machine was dead. Then I went to youtube. It seemed like the "agitator dogs" were the issue.
In this spirit of any repair, I replaced them, and it was not the issue. I don't know what I expected.
Ceiling. YouTube. Pacing ... Read more .
Then I figured it was this part - the motor coupling. I unplugged the machine and took out the drain tube. I leaned the machine back and propped it up with an empty detergent bottle, because those were abundant. Ratchet off a few bolts and the motor comes out. The coupling was indeed broken. The new one slips right in - I tapped it a few times with a mallet for good measure / vengeance. Ratcheted the bolts back on and tipped it back up.
Pros: Washer works now.
Cons: Everest-esque laundry pile to address.
But hey, it worked! I am no handyman and it wasn't too bad at all. Half hour tops.
In this spirit of any repair, I replaced them, and it was not the issue. I don't know what I expected.
Ceiling. YouTube. Pacing ... Read more .
Then I figured it was this part - the motor coupling. I unplugged the machine and took out the drain tube. I leaned the machine back and propped it up with an empty detergent bottle, because those were abundant. Ratchet off a few bolts and the motor comes out. The coupling was indeed broken. The new one slips right in - I tapped it a few times with a mallet for good measure / vengeance. Ratcheted the bolts back on and tipped it back up.
Pros: Washer works now.
Cons: Everest-esque laundry pile to address.
But hey, it worked! I am no handyman and it wasn't too bad at all. Half hour tops.
Read less
This part is an OEM from Broil King. The metal bolt (1/4-20 x 3/4) is compatible with several Broil King grills. This item is sold individually. Please refer to the manual for the specific application of the bolt.
This part is an OEM from Broil King. The metal bolt (1/4-20 x 3/4) is compatible with several Broil King grills. This item is sold individually. Please refer to the manual for the specific application of the bolt.
This is a genuine Weber repair part used with charcoal grills. This is an eleven-piece repair kit that is used with the Lid Bale, a long metal piece that holds the lid open and on the back of the grill during cooking.
This is a genuine Weber repair part used with charcoal grills. This is an eleven-piece repair kit that is used with the Lid Bale, a long metal piece that holds the lid open and on the back of the grill during cooking.
This genuine OEM repair kit is used with Weber grills. This is a four-part assembly that includes two posts and two retaining clips. The posts are designed to hold the lid to the body of the grill while still allowing it to move freely like a hinge.
This genuine OEM repair kit is used with Weber grills. This is a four-part assembly that includes two posts and two retaining clips. The posts are designed to hold the lid to the body of the grill while still allowing it to move freely like a hinge.