Weber Grill Hardware

When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.

A burner with uneven flames or poor heating may have a dirty, damaged, or incorrectly placed burner cap. This black cap covers a high-output burner head and helps guide the flame outward for steady heat. First, let the cooktop cool and remove any grease or food blocking the burner openings. Dry every surface completely and reseat the cap before testing. Replacement may be needed if the cap is chipped, bent, corroded, or no longer rests evenly. Match the new cap to the appliance model and burner location because similar caps can differ. Stop using the cooktop and shut off the gas supply if you detect a gas odor.

This is a genuine Weber repair part used with charcoal grills. This is an eleven-piece repair kit that is used with the Lid Bale, a long metal piece that holds the lid open and on the back of the grill during cooking.

This genuine OEM repair kit is used with Weber grills. This is a four-part assembly that includes two posts and two retaining clips. The posts are designed to hold the lid to the body of the grill while still allowing it to move freely like a hinge.

This is an authentic manufacturer-sourced hardware which is specially designed for use with Weber smokers. It includes all the necessary bolts, screws and washers utilized on the unit. Please make sure to check the appropriate diagrams of your model for the correct locations and applications of this item. The components are made of high-quality metal and is sold as an individual pack. You will need a flat-head screwdriver and the wrench to secure or remove these parts.

These are authentic manufacturer-sourced replacement parts that are supplied for use with Weber grills. This is the hardware kit which is used to secure the burner tubes and grease tray rails, please make sure to check appropriate diagrams of your model for correct application. This item includes four high-quality metal screws, keep in mind you will need a wrench or a flat-head screwdriver to install or remove the hardware.

This is an authentic Weber replacement part, sourced from the original manufacturer for use with gas grills. The hardware set includes the rotisserie forks and the screws for the forks. The rotisserie hardware is sold as a set and the sets are sold individually, please note the motor, bracket, and shaft for the rotisserie are available separately. Recommended parts • Rotisserie Shaft, part number: 80622 • Motor For Tuck Away Rotisserie, part number: 65579 • Tuck Away Rotisserie Bracket Assembly, part number: 70885