My Orders
Engine Hoses and Tubes
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Shop By Brand
View More
Popular Engine Hoses and Tubes
The fuel return tube or fuel return line, as it is also known, delivers fuel back to the tank from the primer bulb. This is a genuine OEM part from the manufacturer, and it is yellow in color and sold individually. Its overall dimensions are 3x6x90mm. Over time, or due to over-tightening, cracks may appear in your fuel return tube, causing fuel to leak. You will know it is time to replace this part if you notice these symptoms.
This is an easy repair, according to our customers, and does not require any special tools. The new part will simply attach to the primer bulb and fuel tank.
The fuel return tube or fuel return line, as it is also known, delivers fuel back to the tank from the primer bulb. This is a genuine OEM part from the manufacturer, and it is yellow in color and sold individually. Its overall dimensions are 3x6x90mm. Over time, or due to over-tightening, cracks may appear in your fuel return tube, causing fuel to leak. You will know it is time to replace this part if you notice these symptoms.
This is an easy repair, according to our customers, and does not require any special tools. The new part will simply attach to the primer bulb and fuel tank.
Installation Instructions
Paul from SENECA, SC
Fuel line grommet rotted
This blower is quite old looked on YouTube. Removed grommet with needle nose pliers. Removed tank to install new parts. I had trouble getting return line off carb so planned to reuse it after grommet was in place. Thin was a mistake because the seated grommet compresses the holes. Took unnecessary time to get it through. With my trimmer w
... Read more
ith all lines in place. Hardest part was to get the grommet to seat even with silicone.
Read less
This is an authentic OEM part for use with Craftsman Lawn Tractors. The deck washout port attaches to the deck and washes grass and debris from under the deck. It is made out of metal and it is sold individually. The tool that you will need to replace the deck washout port is a socket set and a wrench Set.
This is an authentic OEM part for use with Craftsman Lawn Tractors. The deck washout port attaches to the deck and washes grass and debris from under the deck. It is made out of metal and it is sold individually. The tool that you will need to replace the deck washout port is a socket set and a wrench Set.
This is an OEM Honda part manufactured for use with small engines. This rubber grommet is used to provide a seal to allow fuel lines to pass into and out of the fuel tank without leaking. Overtime fuel can deteriorate the grommet, so replacing it can ensure a good seal. The grommet is sold individually, please see model diagram for additional parts.
This is an OEM Honda part manufactured for use with small engines. This rubber grommet is used to provide a seal to allow fuel lines to pass into and out of the fuel tank without leaking. Overtime fuel can deteriorate the grommet, so replacing it can ensure a good seal. The grommet is sold individually, please see model diagram for additional parts.
It is a genuine OEM component which is supplied for use with Husqvarna and Poulan riding lawn mowers and garden tractors. This item provides an identical replacement for a damaged or a missing part that was installed on a new unit. The deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use. This coupling quick content allows a user to attach a garden hose to the washout port on the deck. One durable plastic coupling is included. Note, the metal washout port is sold separately. Replacing it is a simple task that does not require any special tools.
It is a genuine OEM component which is supplied for use with Husqvarna and Poulan riding lawn mowers and garden tractors. This item provides an identical replacement for a damaged or a missing part that was installed on a new unit. The deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use. This coupling quick content allows a user to attach a garden hose to the washout port on the deck. One durable plastic coupling is included. Note, the metal washout port is sold separately. Replacing it is a simple task that does not require any special tools.
This is a Genuine Manufacturer Sourced replacement part used on a a variety of Engines. This is a Fuel Line Connector connects the fuel line to the carburetor. This part is made out of Plastic and Metal, it is Sold Individually.
This is a Genuine Manufacturer Sourced replacement part used on a a variety of Engines. This is a Fuel Line Connector connects the fuel line to the carburetor. This part is made out of Plastic and Metal, it is Sold Individually.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This item is an authentic OEM replacement part that is intended to be used with small engines from Briggs & Stratton. The breather tube is used to guide the direction of excess gasses and fluid that escape the engine from a higher level of internal pressure. The breather tube is a single item, please see the model diagram for related parts.
This item is an authentic OEM replacement part that is intended to be used with small engines from Briggs & Stratton. The breather tube is used to guide the direction of excess gasses and fluid that escape the engine from a higher level of internal pressure. The breather tube is a single item, please see the model diagram for related parts.
Installation Instructions
Emanuel from FERRIDAY, LA
Gas leaking from tube breather
First I opened the top of the mower to expose the housing cover. Secondly I removed the four housing bolts to remove the housing cover from the mower. Next I removed the tube breather and installed the new tube breather and replaced the housing cover with the four bolts previously removed and closed the top of the mower. I filled the mow
... Read more
er with gas to check for leaks which weren't any leaks. I proceeded to mow the lawn with ease.
Read less
This vacuum hose is a genuine OEM replacement designed for small engine fuel systems. It connects the valve cover to the fuel pump, supplying the pressure pulse needed for proper fuel pump operation and consistent fuel delivery. Made from durable, heat- and oil-resistant material and often pre-formed for an exact fit, it’s an ideal replacement when cracked or leaking hoses cause hard starting, stalling, or poor engine performance.
This vacuum hose is a genuine OEM replacement designed for small engine fuel systems. It connects the valve cover to the fuel pump, supplying the pressure pulse needed for proper fuel pump operation and consistent fuel delivery. Made from durable, heat- and oil-resistant material and often pre-formed for an exact fit, it’s an ideal replacement when cracked or leaking hoses cause hard starting, stalling, or poor engine performance.
The breather tube attaches to the air cleaner case assembly and is available individually. It is made of rubber and may require a screwdriver and a wrench during replacement if it becomes broken. This is an authentic replacement part sourced from the original manufacturer for use with Honda small engines and Toro lawn mowers. The tube helps to vent air out of the engine.
The breather tube attaches to the air cleaner case assembly and is available individually. It is made of rubber and may require a screwdriver and a wrench during replacement if it becomes broken. This is an authentic replacement part sourced from the original manufacturer for use with Honda small engines and Toro lawn mowers. The tube helps to vent air out of the engine.
The fuel pump hose attaches to the fuel pump and is made of rubber. This part is available individually but also includes the metal clamp. A set of pliers and a screwdriver may be helpful when replacing this part. It may become broken and will need to be replaced. This is an OEM Kohler and Toro part directly sourced from the manufacturer for use in lawn tractors, motors, and engines.
The fuel pump hose attaches to the fuel pump and is made of rubber. This part is available individually but also includes the metal clamp. A set of pliers and a screwdriver may be helpful when replacing this part. It may become broken and will need to be replaced. This is an OEM Kohler and Toro part directly sourced from the manufacturer for use in lawn tractors, motors, and engines.
This Fuel Line (3x5x182) is a 7.25-inch-long rubber part which is installed inside the fuel tank to the carburetor. It runs from inside of the fuel tank and attaches to the fuel filter inside of the tank. The other end attaches to the carburetor. If damaged, the carburetor will not get enough fuel, and the part must be replaced. Installing this part is rated as "Easy" and can be done with pliers and a screwdriver. Refer to your make, model and diagrams to ensure you're choosing the right part.
This Fuel Line (3x5x182) is a 7.25-inch-long rubber part which is installed inside the fuel tank to the carburetor. It runs from inside of the fuel tank and attaches to the fuel filter inside of the tank. The other end attaches to the carburetor. If damaged, the carburetor will not get enough fuel, and the part must be replaced. Installing this part is rated as "Easy" and can be done with pliers and a screwdriver. Refer to your make, model and diagrams to ensure you're choosing the right part.