Engine Exhausts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Engine Exhausts
Your Price
$6.40
In Stock
Engine Spark Arrester Screen
PartSelect Number PS8867212
Manufacturer Part Number 14586240630
Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of this screen is to prevent flammable debris from entering the engine and becomes worn through regular use. If the screen is clogged, remove the screen from the muffler, hold it with pliers, and use a torch to burn off the debris before reinstalling the screen.
This part needs to be replaced when it becomes damaged or worn. When the screen is malfunctioning, you may notice debris exiting through the muffler. To complete this repair, you will need a screwdriver and pliers. This screen is located within the muffler; refer to your owner's manual for the exact location on your model.
Customers rated this repair as Easy.
Engine Muffler Asm Twin
PartSelect Number PS9026781
Manufacturer Part Number 539131604
This is an authentic replacement part that is OEM sourced to be used with lawn tractors from Husqvarna and Poulan. The muffler assembly is used with engines that have two cylinders. This item connects to the exhaust pipes and is used to reduce noise and emissions produced by the motor. The muffler is available as an individual replacement part.
Your Price
$9.62
On Order
Your Price
$34.74
On Order
Engine Muffler
PartSelect Number PS9910782
Manufacturer Part Number 18310-Z0Y-010
This is an authentic Honda replacement part that is sourced from the original manufacturer for use with small engines. The metal muffler assembly is used to reduce noise and to prevent sparks from exiting the exhaust. This item is available as an individual replacement part.
Engine Muffler
PartSelect Number PS8963090
Manufacturer Part Number 37529
This is an authentic OEM sourced component which is specially made for use with lawn and garden equipment. The purpose of a muffler is to reduce the noise coming from the engine, unfortunately, over time it may get wear out, get damaged or lost eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality item is made of durable metal and is sold individually. It is an identical replacement for a missing or faulty component that was installed on a new unit, please make sure to check the diagrams of your model for the correct location and application of this muffler.
Engine Muffler
PartSelect Number PS9294908
Manufacturer Part Number 693593
The purpose of a muffler is to soften the noise coming from the engine. It is an authentic replacement part that is sourced directly from original manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. Please note this high quality item is sold individually.
Installation Instructions
Philip from LINEVILLE, AL
Needed to replace muffler
Using a socket wrench with extension and a T20 star socket (you can use the appropriate hex head socket also) i removed to two bolts holding the muffler on. They are right on top of the engine and very accessible. Your model may have a heat shield that needs to be removed. Once the muffler is off remove the old gasket. It may be stuck to the muffler or exhaust opening on the engine. It should just pry of with a little effort. I did make sure there were no gasket pieces left behind. I placed the bolts through the flange of the new muffler and then slid the new gasket over the bolts. You can use a exhaust gasket sealant just hold it place while you place the flange in place and not have to worry about gasket dropping off. I just held it until I got the flange in place. I started the bolts by hand using the socket and extension. I alternated from each bolt until I had tighted it down. You can look up torque specs. I just used my grunt meter. It is good as new. Parts were OEM replacement. Not knock off almost right parts. I got very lucky when I found this company and will use them again.
Read more...
Engine Muffler Cp
PartSelect Number PS11847495
Manufacturer Part Number 20A-30101-01
This is an authentic Subaru/Robin replacement part manufactured for use with small engines. This is a complete muffler assembly used to reduce noise produced by the engine. The muffler is sold individually, please note the gasket is available separately.
Engine Muffler
PartSelect Number PS8967008
Manufacturer Part Number 394569S
This is an authentic exhaust muffler specially designed for Briggs and Stratton engines commonly used on Toro lawn and garden equipment. It is supplied directly from original equipment manufacturer and it is sold individually. Muffler softens the noise coming from the engine and provides an additional layer of filtration of exhaust. This metal muffler is manufactured to meet EPA exhaust regulations.
Installation Instructions
Snoopy from TYRONE, GA
Engine Muffler
PartSelect Number PS9064836
Manufacturer Part Number 692038
It is a genuine OEM sourced replacement muffler that is specially designed for Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. Its purpose is to soften the noise coming from the engine and provide an additional layer of filtration of exhaust. This durable metal muffler is sold individually, it is manufactured to meet EPA exhaust regulations. Hardware to secure the muffler and the gasket are all included.