Electrolux Microwave Handles
Find your part
Enter your model number or a part number and click "Search"
Popular Electrolux Microwave Handles
Lower Handle End Cap - Stainless Steel
Repair was pretty straight forward:
1. unclip door wiring harness
2. remove door
3. unscrew door back plate
4. remove spring loaded door latch
5. remove handle by unscrewing handle caps from the back side of the door.
5. remove screw attaching old handle cap(s) from handle and replace with new cap(s)
6. remount handle on door (reverse of step 5). Note that on my unit the handle mounting area on the door was torn away leaving a large hole. I used a large washer to span the hole in the door in order to remount the handle. New doors were not available on this model thus the jerry rig.
7. reassemble door back plate and latch
8. remount door and attach wiring harness Read more...
PartSelect Number PS2582956
Manufacturer Part Number 5304477330
This is a lower handle end cap for a microwave door. It covers the end of the microwave door handle. The cap measures approximately 2 inches by 2.5 inches and is stainless steel. It is located at the lower end of the door handle. This is an authentic OEM replacement part. It is recommended to get a technician to replace this part because your microwave door contains shielding components. Replacing this part on your own may cause leaks in the door. Your microwave should be tested for leaks in the microwave shield to ensure safe operating of your appliance.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
Paul from GUILFORD, CT
Handle fell off due to broken handle end cap/brackets
I ordered new "stainless" upper and lower handle end caps -the caps (brackets) are actually coated plastic, not steel. With age they became brittle and broke resulting in handle coming off unit. Repair was pretty straight forward:
1. unclip door wiring harness
2. remove door
3. unscrew door back plate
4. remove spring loaded door latch
5. remove handle by unscrewing handle caps from the back side of the door.
5. remove screw attaching old handle cap(s) from handle and replace with new cap(s)
6. remount handle on door (reverse of step 5). Note that on my unit the handle mounting area on the door was torn away leaving a large hole. I used a large washer to span the hole in the door in order to remount the handle. New doors were not available on this model thus the jerry rig.
7. reassemble door back plate and latch
8. remount door and attach wiring harness Read more...
Upper Handle End Cap - Stainless Steel
Repair was pretty straight forward:
1. unclip door wiring harness
2. remove door
3. unscrew door back plate
4. remove spring loaded door latch
5. remove handle by unscrewing handle caps from the back side of the door.
5. remove screw attaching old handle cap(s) from handle and replace with new cap(s)
6. remount handle on door (reverse of step 5). Note that on my unit the handle mounting area on the door was torn away leaving a large hole. I used a large washer to span the hole in the door in order to remount the handle. New doors were not available on this model thus the jerry rig.
7. reassemble door back plate and latch
8. remount door and attach wiring harness Read more...
PartSelect Number PS2582977
Manufacturer Part Number 5304477353
This part is an upper handle end cap and it works in conjunction with your microwave. The purpose of this end cap is to clip into the microwave to cover the end of the door handle. This part is made of stainless steel, and it measures to be roughly 3 inches long, 2 inches high, and 1 inch wide. For safety purposes, we ask that before making this repair you unplug your appliance and let it sit for a while unused. Your microwave capacitator stores electricity in large quantities even after it has been unplugged. We recommend using work gloves for this repair.
Fixes these symptoms
- Door not closing properly
- See more...
Installation Instructions
Paul from GUILFORD, CT
Handle fell off due to broken handle end cap/brackets
I ordered new "stainless" upper and lower handle end caps -the caps (brackets) are actually coated plastic, not steel. With age they became brittle and broke resulting in handle coming off unit. Repair was pretty straight forward:
1. unclip door wiring harness
2. remove door
3. unscrew door back plate
4. remove spring loaded door latch
5. remove handle by unscrewing handle caps from the back side of the door.
5. remove screw attaching old handle cap(s) from handle and replace with new cap(s)
6. remount handle on door (reverse of step 5). Note that on my unit the handle mounting area on the door was torn away leaving a large hole. I used a large washer to span the hole in the door in order to remount the handle. New doors were not available on this model thus the jerry rig.
7. reassemble door back plate and latch
8. remount door and attach wiring harness Read more...
Door Handle - Stainless Steel
PartSelect Number PS2582962
Manufacturer Part Number 5304477336
Handle only. End caps must be ordered separately.
Door Handle - Stainless Steel
PartSelect Number PS2343111
Manufacturer Part Number 5304467804
End caps are sold individually. Handle only.
Related Parts
- All Electrolux Microwave parts
- Electrolux Microwave Brackets and Flanges
- Electrolux Microwave Ducts and Vents
- Electrolux Microwave Filters
- Electrolux Microwave Motors
- Electrolux Microwave Panels
- Electrolux Microwave Springs and Shock Absorbers
- Electrolux Microwave Switches
- Electrolux Microwave Transformers