DeWALT Compressor Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular DeWALT Compressor Parts
Your Price
$7.78
In Stock
DeWALT Compressor Drain Valve
PartSelect Number PS12508562
Manufacturer Part Number N286039
Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank.
This part will need to be replaced when it is no longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair.
Customers rate this repair as Easy.
Fixes these symptoms
- Air leak
- See more...
Your Price
$41.22
In Stock
DeWALT Compressor Regulator Repair Kit
PartSelect Number PS18993125
Manufacturer Part Number N008792
This air compressor regulator repair kit restores proper pressure control and airflow by replacing worn internal components such as seals and the piston. Designed to address leaks or inconsistent pressure, it helps return the regulator to reliable working condition. Replacing damaged parts with this kit can improve performance and ensure consistent operation.
Fixes these symptoms
- Air leak
- See more...
Your Price
$53.07
In Stock
DeWALT Compressor Belt
PartSelect Number PS10187047
Manufacturer Part Number N011005
it is a genuine item that is supplied directly from the original equipment manufacturer for use with Craftsman air compressors. This high-quality belt provides an identical replacement for a missing or damaged component that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality belt is made of durable rubber and is sold individually,
Your Price
$6.40
In Stock
DeWALT Compressor O-ring
PartSelect Number PS18991071
Manufacturer Part Number AC-0781
This O-ring tube seal helps create an airtight connection where the tube enters the compressor head, supporting proper pressure and efficient operation. Made from durable rubber, it is designed to withstand heat and wear during regular use. Replacing a worn or damaged seal can help prevent air leaks and restore consistent compressor performance.Provide your feedback on BizChat
Your Price
$6.40
In Stock
DeWALT Compressor Clamp Hose .250 Id
PartSelect Number PS12513333
Manufacturer Part Number CAC-1206-1
Genuine OEM replacement part, this item is sold individually. This part is used in various places in the compressors listed below. By its part name, it is used to clamp hoses onto certain parts on the compressors.
Fixes these symptoms
- Air leak
- See more...
Your Price
$22.71
In Stock
DeWALT Compressor Valve Plate Assy
PartSelect Number PS12517182
Manufacturer Part Number N017592SV
Genuine Porter Cable replacement part, this item is sold individually. Head Gasket Sold Separately. This part is used in the all of the compressors models listed below. When air is pumped by the piston it passes through the Valve Plate into the compressor tank. There are reeds on the valve plate that will eventually wear out, and the Valve plate will need to be replace. It is advisable at this time to replace the Graphite Gasket Kit, part number D30139.
Fixes these symptoms
- Air leak
- No compressed air
- See more...
Your Price
$68.50
In Stock
DeWALT Compressor Connecting Rod And Piston Asse
PartSelect Number PS10187559
Manufacturer Part Number N038785
This is a Genuine OEM replacement part designed for use with Air Compressors. This kit includes parts commonly responsible for low compression, including the piston and compression ring. Please note that this kit does not include the valve plate, head gaskets, or any other compressor parts. Replacing this kit you would need a Screwdriver and a Wrench.
Fixes these symptoms
- No compressed air
- See more...
Installation Instructions
Cary from SAGLE, ID
Older compressor runs but no longer builds pressure
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
Read more...
Your Price
$6.40
In Stock
DeWALT Compressor Tube Seal
PartSelect Number PS12522478
Manufacturer Part Number N044359
This replacement tube seal is a high quality item that is supplied by original equipment manufacturer for use with Craftsman air compressors. It is placed on the outlet tube coming from the head of the compressor. Please note this durable rubber tube seal is sold individually.
Fixes these symptoms
- Air leak
- See more...
Installation Instructions
Linda from CARO, MI
The compressor was getting air
Put the seal in and it ran like a champ. No vacuum leak and it now runs again!
Read more...
Your Price
$86.76
In Stock
DeWALT Compressor Kit Comp Ring Replac
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws Read more...
PartSelect Number PS12518127
Manufacturer Part Number K-0650
This kit is an OEM part direct from Craftsman for air compressors. This kit consists of the parts for building a piston cylinder in the compressor. It is recommended that you release air and unplug the air compressor before you install this kit. You will need a wrench set to replace this part. This kit includes two o-rings, piston ring clamp screw and the cylinder tube. This kit is made of metal and rubber components.
Fixes these symptoms
- No compressed air
- See more...
Installation Instructions
Charles from GARRISON, TX
The air was bypassing the compressor gaskets and cylinder wall was worn out
1 remove cover 2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws Read more...
Your Price
$6.40
In Stock
DeWALT Compressor Oring P/l Head
PartSelect Number PS12513125
Manufacturer Part Number ACG-45
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure. The most common among power tools are: • <u>Extrusion and Nibbling</u> - The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • <u>Abrasion</u> - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • <u>Over Compression </u> - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • <u>Heat Hardening</u> - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • <u>Weather/Ozone Cracking</u> - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
DeWALT Compressor Appliance Types
Related DeWALT Compressor Parts
Popular DeWALT Compressor Models
Below are the most popular DeWALT Compressor models we have. Enter your model number in the search box to find your model.
- D55168 (Type 7) Compressor
- D55168 (Type 9) Compressor
- D55168 (Type 10) Compressor
- D55168 (Type 4) 1.8HP 15G Compressor
- D55168 (Type 3) Electric Compressor
- D55168 (Type 1) Compressor
- D55168 (Type 6) Compressor
- D55168 (Type 5) 1.8HP 15G Compressor
- D55168 (Type 8) Compressor
- D55168 (Type 2) 200PSI, 15Gal., 120V Electric Compressor
- D55146 (Type 4) Compressor
- D55146 (Type 2) 4.5 gallon, 200 PSI Hand Carry Compressor
- D55146 (Type 9) Compressor
- D55146 (Type 5) Compressor
- D55146 (Type 8) Compressor
- D55146 (Type 3) Compressor
- D55146 Type 1 Compressor
- D55146 (Type 7) Compressor
- D55146 (Type 1) Compressor
- DXCM601 (Type 3) Air Compressor