This is a genuine replacement part sourced directly from the manufacturer. The fan is commonly found in Craftsman air compressors. This part is made of high-quality plastic, and is placed in the cylinder/pump assembly to provide a cooling air flow. You may require a wrench or screwdriver when replacing this item. The fan is sold as an individual replacement part.
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling - The O-ring has ragged, tattered edges. ...Read moreThese are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
Genuine OEM replacement part, this item is sold individually. This part is used in various places in the compressors listed below. By its part name, it is used to clamp hoses onto certain parts on the compressors.
it is a genuine item that is supplied directly from the original equipment manufacturer for use with Craftsman air compressors. This high-quality belt provides an identical replacement for a missing or damaged component that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the...Read more correct location and application of this item. Keep in mind this high-quality belt is made of durable rubber and is sold individually,
This O-ring is compatible with various models of compressors made by DeWALT, Black & Decker, and Bostitch. It is an authentic replacement part from original manufacturer. An O-ring is used to prevent pressure loss between joined rigid parts by creating a seal. Many tools require working O-rings in order to function. Please check that the ...Read morecorrect O-ring is being used in the correct position, as many tools use multiple different O-rings throughout. Sold individually.
This saddle mount cup is an OEM direct from Craftsman for air compressors. This part holds the screw in place. You will need a wrench to remove the bolts that go through it. It is recommended that you wear gloves when replacing this part. This saddle mount cup is made of steel and sold individually.
It is an authentic item that is supplied by the original manufacturer for use with air compressors. The inlet filter helps to ensure that the air that goes through the unit is free of dust and other harmful contaminants. After some time it will get clogged and will need to be replaced to ensure a good and clean air flow. Replacing it is a...Read more simple task that should not require any tools, simply unscrew the old one and secure the new one. This filter and housing are sold as an individual component.
Upgrade your Craftsman appliance with this essential Valve Plate Assembly. Known for its robust build and top-quality material this component ensures your appliance performs effectively and efficiently. This Valve Plate Assembly is designed to replace worn-out or damaged parts restoring your Craftsman equipment back to its best working co...Read morendition. Experience the difference of a genuine Craftsman component and enjoy the assured longevity and excellent performance that comes with it. Trust this high-quality Craftsman piece for optimal appliance functioning.
This O-ring tube seal helps create an airtight connection where the tube enters the compressor head, supporting proper pressure and efficient operation. Made from durable rubber, it is designed to withstand heat and wear during regular use. Replacing a worn or damaged seal can help prevent air leaks and restore consistent compressor performance.Provide your feedback on BizChat
This is a genuine replacement part sourced from the original manufacturer for use with air compressors made by Craftsman. The user will need to replace this part if it is missing or not working correctly. This part is made of metal and sold individually.
This is a genuine item that is supplied by the original equipment manufacturer for use with DeWALT compressors. It is an identical replacement for a missing or damaged front shroud that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of th...Read moreis component. Keep in mind this high-quality item is made of durable plastic and is sold individually.
This part is made of metal and is available as an individual replacement. The cylinder sleeve goes next to the o-ring and the valve plate. During replacement, it may require a wrench to help install this item correctly. It will need to be replaced if it becomes broken. This is a genuine OEM sourced part which is specially designed for use with compressors made by DeWALT, Black & Decker, and Bostitch.
My Orders
