My Orders
Crosley Freezer Compressors
GET YOUR OFFICIAL Crosley PARTS TO ENSURE VICTORY
Popular Crosley Freezer Compressors
This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.
This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.
The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.
The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.
This start relay helps initiate compressor operation by providing a temporary boost of power. Proper relay function ensures reliable cooling performance. Replacing a faulty relay can resolve start-up or cooling issues.
This start relay helps initiate compressor operation by providing a temporary boost of power. Proper relay function ensures reliable cooling performance. Replacing a faulty relay can resolve start-up or cooling issues.
This heat exchanger, also known as a suction or capillary tube, is an essential component of your refrigerator or freezer’s sealed system. It transfers heat from inside the appliance to the outside environment, helping maintain a consistent temperature for optimal food preservation. By carrying refrigerant between the condenser and evaporator, it ensures efficient cooling performance. A properly functioning heat exchanger improves energy efficiency and supports a longer appliance lifespan.
This heat exchanger, also known as a suction or capillary tube, is an essential component of your refrigerator or freezer’s sealed system. It transfers heat from inside the appliance to the outside environment, helping maintain a consistent temperature for optimal food preservation. By carrying refrigerant between the condenser and evaporator, it ensures efficient cooling performance. A properly functioning heat exchanger improves energy efficiency and supports a longer appliance lifespan.
Installation Instructions
Mike from Jacksonville, FL
Copper lines leaking freon
Removed the inside evaporator coil to do inside solder job, use torch to heat solder joints on the outside drier in order to remove it and install new drier. Soldered Heat exchanger line to drier and 1/4” copper line to compressor. Wrapped with new insulation wrap. Pulled a vacuum on system and then charged with 4.4 ounces of 134a freon.
... Read more
Works like a champ again!
Read less
This compressor start relay is a replacement electrical component that helps start and protect the compressor during operation. It is commonly replaced when cooling systems fail to start, click repeatedly, or shut down shortly after startup. Proper fitment should be verified prior to installation.
This compressor start relay is a replacement electrical component that helps start and protect the compressor during operation. It is commonly replaced when cooling systems fail to start, click repeatedly, or shut down shortly after startup. Proper fitment should be verified prior to installation.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Also known as the start device/relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Also known as the start device/relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Installation Instructions
albert jr from Gig Harbor, WA
power surge, burnt out Freezer Main Control Board PS3502429
Used putty knife to pop out old control board. Which is located on the front of the freezer door. The hard part was determining that this was the problem in the first place. I first replaced the compressor controller and the Run Capacitor. compressor still would not start. when I installed the new control board, it ran perfect.
This drier may also be known as a refrigerator ultra-violet dye drier or a filter drier and is meant to be used with your fridge. This piece is a filter for the refrigerant that moves through the refrigerators sealed-system. The most common reason you will need to replace the filter is if your fridge/freezer is not starting. You should consider having this piece installed by an appliance repair technician that is trained and licensed. Installing this part requires specialized knowledge and tools. The installation will require the service technician to recover and recharge the refrigerant in the refrigerators sealed-system.
This drier may also be known as a refrigerator ultra-violet dye drier or a filter drier and is meant to be used with your fridge. This piece is a filter for the refrigerant that moves through the refrigerators sealed-system. The most common reason you will need to replace the filter is if your fridge/freezer is not starting. You should consider having this piece installed by an appliance repair technician that is trained and licensed. Installing this part requires specialized knowledge and tools. The installation will require the service technician to recover and recharge the refrigerant in the refrigerators sealed-system.
This refrigerator compressor is a key component in the cooling system, responsible for compressing and circulating refrigerant gas throughout the appliance. It increases the pressure and temperature of the gas before sending it through the condenser coils, where heat is released and the gas condenses into a liquid. The refrigerant then travels to the evaporator, where it expands and evaporates, creating a cooling effect that is distributed throughout the refrigerator. A malfunctioning compressor can lead to poor cooling performance or complete system failure. Proper lubrication and cooling are essential for maintaining its efficiency and extending the life of your appliance.
This refrigerator compressor is a key component in the cooling system, responsible for compressing and circulating refrigerant gas throughout the appliance. It increases the pressure and temperature of the gas before sending it through the condenser coils, where heat is released and the gas condenses into a liquid. The refrigerant then travels to the evaporator, where it expands and evaporates, creating a cooling effect that is distributed throughout the refrigerator. A malfunctioning compressor can lead to poor cooling performance or complete system failure. Proper lubrication and cooling are essential for maintaining its efficiency and extending the life of your appliance.
This part helps protect the motor from overheating. The relay is sold separately.
This part helps protect the motor from overheating. The relay is sold separately.
Installation Instructions
Steven from Mobile, AL
stopped running
replaced overload, but the start relay looked different, and wasn't sure how to replace it.Unit is now running