Quick Question!

Have you ever purchased from PartSelect.com before?

Popular Caloric Cooktop Parts

Your Price
$4.17
Chrome Drip Bowl - 8"
PartSelect Number PS11750107
Manufacturer Part Number WPW10196405
This drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements, and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 9 3/4 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line the hole on the new bowl up with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discoloration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water.
Fixes these symptoms
Element will not heat


Installation Instructions
Joe from Greeley, CO says,

oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
....read more

Your Price
$9.24
Drip Bowl - 6"
PartSelect Number PS2366565
Manufacturer Part Number W10196406RW
If your element will not heat, there could be an issue with your drip bowl. This 6 inch chrome drip bowl fits most electric ranges. Before you replace the drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and replace the element. Make sure the small hole on the bowl lines up with the element socket. The manufacturer has substituted this part, it has a hole in the center, and no longer has a solid bottom. For a step by step guide, click the video below.
Fixes these symptoms
Element will not heat


Installation Instructions
Michael from Kings Park, NY says,

Drip bowls were rusty and rotting through
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better!...read more

Your Price
$3.92
Drip Bowl - 6"
PartSelect Number PS11750108
Manufacturer Part Number WPW10196406
This drip bowl is used for electric cooktops and ranges, it is designed to sit under a six-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 7 2/3 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.
Fixes these symptoms
Element will not heat


Installation Instructions
Joe from Greeley, CO says,

oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
....read more

Your Price
$11.12
Surface Burner Plug-In Block Kit
PartSelect Number PS340571
Manufacturer Part Number 330031
The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.
Fixes these symptoms
Element will not heat


Installation Instructions
Jon from Oakley, CA says,

Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dry...read more

Your Price
$46.04
Flat Style Oven Igniter
PartSelect Number PS387058
Manufacturer Part Number 786324
The flat style oven igniter is also known as a range oven igniter. The function of this part is to glow extremely hot in order to ignite the gas for the oven burner. With this flat style oven igniter, you must reuse the original bracket from your original igniter. Be very careful during installation to not touch the black element part of the flat style oven igniter as it is very fragile. If your oven does not heat you should check to see if your igniter is glowing. If your igniter is glowing and the oven is not heating there is a chance that the igniter is not strong enough to heat your oven and it will need to be replaced.
Fixes these symptoms
Element will not heat
Gas igniter glows, but will not light
Little to no heat when baking

See more...
Installation Instructions
John from Niles, MI says,

Oven wouldn't heat. Glow ignitor was weak and wouldn't ignite flame.
After shutting off the gas and removing the oven door, which simply slid off of the hinges, I removed the oven plate. The ignitor was attached to the manifold. I removed that and noted the wires wer...read more

Your Price
$7.48
Square Chrome Drip Pan (sides measuring 7-3/4" each)
PartSelect Number PS11757427
Manufacturer Part Number WPY0060872
The drip pan is found under the burner. This square chrome stovetop drip pan is intended for use with gas ranges. It has a 4-inch diameter center hole and 7 3/4 inch sides. Drip pans should be cleaned regularly, and replaced when too much food has been burned and stuck to it, making it too hard to clean. You should replace your drip pan if it is rusted or damaged. Grease, oil, and food can spill into your unit and become a fire hazard. This drip pan is dishwasher safe and is sold individually.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
William from Houston, TX says,

Replaced ignitor - natural gas oven
Oven was lighting slowly and finally just stopped lighting. I ordered and replaced old ignitor with a new one. The actual repair is pretty easy. However, this is the second one I purchased, the first ...read more

Your Price
$32.48
Hinge Kit - Right Side
PartSelect Number PS2172201
Manufacturer Part Number R0706011
The hinge kit, or oven door hinge, is used in ranges and wall ovens. The hinge attaches to the right side of the door and controls how fast the door opens. At a specific angle, it allows the door to remain open. If you are having trouble opening and closing your door, or it does not close at all, replacing the hinge could solve your problem. The hinge is made from metal and the kit comes with the hardware needed for this installation. You will need a screwdriver to perform this repair. *Please note: This part is only for the right side of your appliance. The left side is sold separately.
Fixes these symptoms
Door won’t close


Installation Instructions
Roger from Pleasanton, CA says,

Rivet broke on the right side oven door hinge
Regarding my right side oven door hinge replacement, P/N PS2172201

After reading that other people had trouble threading the screws into the new hinge, I looked at the drilled mounting hole...read more

Your Price
$11.18
Clock Knob
PartSelect Number PS2032461
Manufacturer Part Number 315210B
This clock knob does not come with a tension spring insert.
Fixes these symptoms
No Symptoms for this part
Your Price
$43.40
Broil Element
PartSelect Number PS11757430
Manufacturer Part Number WPY0063532
This broil element is found on the roof of the oven and allows for an even heat when cooking food. The element may have shorted out and not be heating the oven, which might indicate it will need to be replaced. Before beginning the repair make sure your oven has been unplugged. Open the oven door and pull the old racks out. You will need to remove the screws holding the old broiler in place at the top of the stove. This is an OEM part that comes right from the manufacturer.
Fixes these symptoms
Element will not heat
Little to no heat when baking
Little to no heat when broiling

See more...
Installation Instructions
Richard from Bealeton, VA says,

Broiler stopped workin in summer. Oven had no heat for wife to make Christmas cookies.
First thing I tripped the range breaker. Pulled the range out from the wall and unpluged main plug. I then removed the 12 sheet metal screws from the back lower cover.
I then unpluged the wires f...read more

Your Price
$23.69
Burner Knob
PartSelect Number PS2192629
Manufacturer Part Number Y0307217
Sold individually.
Fixes these symptoms
No Symptoms for this part