Air Conditioner Knobs
Find your part
Enter your model number or a part number and click "Search"Popular Air Conditioner Knobs
Your Price
$13.96
Control Knob
PartSelect Number PS961417
Manufacturer Part Number WJ12X10072
This is a control knob. You may also know it as a room air rotary switch control and it is used in conjunction with your air conditioner. The function of this part is to allow you to turn the rotary switch in order to select the different fan cooling modes. For this repair, you will not require any tools. To change this part all you will have to do is grip the knob firmly and give it a quick pull. This should eject the knob from the rotary switch. When you have received your new part, it will snap back in place. This part is beige and has an outer diameter of almost 1.5 inches.
Fixes these symptoms
- Does not turn on
- See more...
Your Price
$5.18
Control Knob
PartSelect Number PS11738318
Manufacturer Part Number WP1158639
Installation Instructions
Alice from VIENNA, MD
Replace missing temperature control knob
control switch for GE air conditioner fit my ancient Whirlpool 10K BTU air conditioner - slip on
Read more...
Your Price
$10.76
Control Knob
PartSelect Number PS11738317
Manufacturer Part Number WP1158054
This air conditioner control knob is gray in color, and measures approximately 1 inch in diameter. This replacement part allows you to properly control all the air conditioner settings. If your knob has broken or gone missing it will need to be replaced. This repair requires no tools to complete. You simply remove the old knob by pulling it off and press the new knob into place by lining it up with the shaft. This genuine OEM replacement knob is sold individually.
Installation Instructions
David from Nashua, NH
Dosen't seem to fit.Won't go all the way on.
put the knob on and pushed it as far as it would go.
Read more...
Your Price
$7.54
Knob
PartSelect Number PS1020300
Manufacturer Part Number WJ12X10085
This is the replacement control knob for your air conditioner. It is made of white plastic with a gray indicator dot and is approximately 1 ¼ inch in diameter. The control knob fits onto a shaft on your air conditioner and allows you to adjust the settings. If the knob is stripped, damaged, or missing, this is the part that replaces it. To replace the knob, carefully slide the old knob off the shaft, then replace it with the new knob, being sure that the indicator dot is in the correct position. The knob is an OEM part sourced directly from the manufacturer, and is sold individually.
Your Price
$43.88
Control Knob
Then it was a simple matter to unscrew two small screws holding the broken cooling selector switch in place.
At this point, I unhooked each wire (about 7 of them) from their terminal connector on the back of the switch, and reapplied each to the new switch. After I was done I then mounted the new switch with the two screws and realigned the pannel.
The only thing remaining was to install the small pannel using three pop rivets and slide on a new knob, and reinstall the large A/C front cover.
FYI, The new replacement switch and knob were perfectly identical, and worked like a charm. Read more...
PartSelect Number PS11744805
Manufacturer Part Number WP8031121
This control knob may also be known as the selector knob or the room air conditioner rotary switch knob, and is compatible with your room air conditioner. The part will allow you to shift the rotary switch to pick which cooling and fan modes you prefer. This piece is sold individually, it comes in a light gray shade, and accepts a D-shaped shaft. You can easily make this repair by pulling the old knob directly off its post to remove it, and snapping the new part in its place. This model measures to be about one inch in diameter.
Installation Instructions
Vince from Redding, CA
The cooling selector switch stopped working
First removed the power and front panel. Then in order to get to the damaged cooling selector switch, I needed to first drill out three riviets holding the small front pannel that the switch and thermostat selector switches are mounted on.Then it was a simple matter to unscrew two small screws holding the broken cooling selector switch in place.
At this point, I unhooked each wire (about 7 of them) from their terminal connector on the back of the switch, and reapplied each to the new switch. After I was done I then mounted the new switch with the two screws and realigned the pannel.
The only thing remaining was to install the small pannel using three pop rivets and slide on a new knob, and reinstall the large A/C front cover.
FYI, The new replacement switch and knob were perfectly identical, and worked like a charm. Read more...
Your Price
$31.68
Control Knob - Bisque
PartSelect Number PS962908
Manufacturer Part Number WP12X10002
This knob accepts a D-shaped shaft. Sold individually.
Your Price
$22.53
Your Price
$35.27
Control Knob with Clip
PartSelect Number PS274605
Manufacturer Part Number WJ12X10009
This is a control knob with clip, used for air conditioners. This type of knob allows you to control the temperature by rotating it. Replace the knob if yours is damaged, broken, or will not rotate consistently. The knob fits a D-shaped shaft and is white in color. The measurements are: 6 inches in length and width. Refer to the diagram provided by the manufacturer for further installation instructions and accurate guidance.
Installation Instructions
Richard from Alexandria, VA
Haier Control Knob discontinued - Locating substitute was difficult
part select webite photos really helped choose three potential part substitutes. Arrived quickly, one worked, return policy for other great.
Read more...