Yard Machines Log Splitter Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Yard Machines Log Splitter Parts
Your Price
$28.42
In Stock
Yard Machines Log Splitter Air Filter
PartSelect Number PS9183894
Manufacturer Part Number BS-491588S
This air cleaner cartridge is designed for small engines to effectively filter dust, dirt, and grass debris from the intake system. Featuring a flat, pleated paper design, it helps maintain proper airflow for smooth engine operation and dependable performance. It’s an easy, drop-in replacement for routine maintenance, supporting cleaner combustion and longer engine life.
Your Price
$23.44
In Stock
Yard Machines Log Splitter Spider Bushing
PartSelect Number PS9106439
Manufacturer Part Number 735-04103
This rubber and plastic spider bushing is a genuine OEM part for various makes of log splitters and is sold as an individual part. Measuring at approximately 2-inches by 2-inches, this bushing is attached to the motor or drive shaft and is used to support the rotating shaft and other components, all while allowing smooth rotation and proper alignment. The spider bushing rides between the couplings, connecting the engine and the hydraulic pump. If you notice excessive vibrations from the motor, check the drive motor shaft for a cracked bushing or couplings, since they work together and are often replaced at the same time.
Your Price
$6.40
In Stock
Yard Machines Log Splitter Trimmer Flat Washer 3/8n I.d.
PartSelect Number PS9109281
Manufacturer Part Number 736-0262
This OEM replacement washer is often used on several different types of lawn and garden equipment, but can also be used on compatible home trimmers. It is made of metal, meaning it is vulnerable to corrosion and will produce more noise from your lawn equipment or trimmer if it has broken. Its main purpose is to reduce rattling and noise, or to better secure and evenly distribute pressure between two different parts. This washer has a .38-inch inner diameter, .87-inch outer diameter, and .09-inch thickness and is sold individually.
Your Price
$23.44
In Stock
Yard Machines Log Splitter Coupling
PartSelect Number PS9095317
Manufacturer Part Number 718-04392
This coupler connects the engine or motor to the hydraulic pump in your lawn equipment. It has a 0.5-inch inside diameter and is typically located near the rear coupling support bracket. If the coupler is broken, you will notice excessive play, cracks, or a loss of power transmission. Failure to replace a broken coupler can result in reduced power, poor operation, or complete equipment failure. To remove the coupling from your machine, remove any retaining bolts, screws, or clamps securing it in place using a wrench or socket. Afterward, gently wiggle or twist the coupling to release it. This replacement part is sourced directly from its original equipment manufacturer and is sold individually.
Your Price
$29.34
In Stock
Yard Machines Log Splitter Coupling-logsplitt
PartSelect Number PS9299988
Manufacturer Part Number 718-04395
This genuine manufacturer-sourced component is specially made for use with MTD and Troy-Bilt log splitters. It is an identical replacement for a missing or a faulty coupling that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually. Note, the other <a href="http://www.ereplacementparts.com/coupling-500-p-353607.html" target=blank><u>#718-04392 Coupling, . 500</u></a> is sold separately.
Your Price
$7.68
Special Order
Yard Machines Log Splitter Pin-cotter
PartSelect Number PS16410594
Manufacturer Part Number 714-0162
This Cotter Pin is a silver 5/32x1-1/4 metal part, sold individually and certified by the original equipment manufacturer.
It connects to the axel shaft after the wheel and washer have been installed but before the hub cap. It is used to prevent the wheel from falling off, and if it breaks (due to fatigue) the wheel will fall off. Check your model number for the correct size of replacement cotter pin to know you are ordering the correct model.
This is a one-time use product, which should be replaced during any other repair in which it is disturbed or dislodged.
Your Price
$6.40
In Stock
Yard Machines Log Splitter Lawn Mower Air Valve
PartSelect Number PS9311038
Manufacturer Part Number 934-0255
The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. When replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.
Your Price
$26.60
Special Order
Yard Machines Log Splitter Cone Bearing
PartSelect Number PS16462296
Manufacturer Part Number 941-04298
This OEM Cone Bearing, also known as a Tapered Bearing, is a silver, .75 I.D., metal part. Sold individually, it attaches inside the wheel hub, and customers have rated the installation as Medium Difficulty. It is recommended to pack the bearing before installation.
This part reduces friction on a moving part, inside of a stationary part. When it breaks, you will hear a grinding, growling or squealing sound. It must be replaced when worn or damaged (such as if there are scores on the rollers or on the mandrel).
Your Price
$6.40
In Stock
Yard Machines Log Splitter Washer-thrust
PartSelect Number PS9408440
Manufacturer Part Number 736-0351
Your Price
$10.77
In Stock
Yard Machines Log Splitter Bearing-cup
PartSelect Number PS9169358
Manufacturer Part Number 941-04299
This is a genuine Troy-Bilt replacement part sourced directly from the manufacturer. The cup bearing is commonly found in Troy-Bilt tillers. This part is made of metal, and is used with the cone bearing to join the drive shaft with the transmission housing. You may require pliers when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.
Yard Machines Log Splitter Appliance Types
Related Yard Machines Log Splitter Parts
- Yard Machines Log Splitter Hoses and Tubes
- Yard Machines Log Splitter Latches
- Yard Machines Log Splitter Oil Plugs
- Yard Machines Log Splitter Seals and Gaskets
- Yard Machines Log Splitter Shear Pins
- Yard Machines Log Splitter Spark Plugs
Popular Yard Machines Log Splitter Models
Below are the most popular Yard Machines Log Splitter models we have. Enter your model number in the search box to find your model.
- 24AF550C000 (2003) Log Splitter
- 24AF550C000 (2002) Log Splitter
- 24BF550B029 (2008) Yard Machines Log Splitter Model 24BF550B029/2008 Parts
- 24BF550B029 (2007) Yard Machines Log Splitter Model 24BF550B029/2007 Parts
- 24AD586B000 (2000) Log Splitter
- 24AD586B000 (2001) Log Splitter
- 24AD586B000 (1998) Log Splitter
- 24AD586B000 (2002) Log Splitter
- 24BF51MX700 (2015) Log Splitter
- 24BF51MX700 (2014) Log Splitter
- 24BF552B729 (2009) Log Splitter
- 24AA5DMK029 Yard Machines Log Splitter Model 24AA5DMK029 Parts
- 24AA5DMK029 (2007) Log Splitter
- 247A500A118 (1997) Log Splitter
- 24AF501D700 (2005-2) Log Splitter
- 247D556A062 (1997) Log Splitter
- 24AF572B129 (2004) Log Splitter
- 24BA561D206 (2000) Log Splitter
- 24AD586B700 Yard Machines Log Splitter Model 24AD586B700 Parts
- 24AE586B752 (2005) Log Splitter