Trimmer Tanks and Containers

This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines are clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.

Fuel tanks are responsible for storing and supplying fuel, like gasoline, for an engine. This fuel tank assembly is designed for and compatible with various models of trimmers and includes the plastic fuel tank and fuel cap, securing screws, and 2 fuel lines. To best maintain your fuel tank, make sure to inspect the fuel filter regularly for any clogs that could affect equipment performance, and replace it when necessary. Over time and through aging, fuel tanks themselves can wear down and crack, or get severely clogged, leading to issues like contamination rendering the tank unsafe to use, and in need of replacement. You must drain the fuel from the tank before you replace it, and you will need a screwdriver or wrench to remove any panels and securing screws containing the tank.

This genuine fuel tank assembly is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman trimmers and weedwackers. Made from high-quality plastic for durability, it includes the attached fuel tank cap for a secure seal. Replacing this part may require an Allen wrench or hex key, depending on your model. The fuel tank assembly is sold individually and is designed to meet OEM standards for fit and performance.

This genuine replacement fuel tank assembly is soured directly from original equipment manufacturer. It is used on handheld gas string trimmers. It is made out of plastic and it includes the fuel tank, fuel lines and a fuel cap. It is very important to replace the fuel tank if it is cracked or damaged to avoid damage or serious injuries. Make sure to drain the gas tank before starting a repair. Please note the fuel tank tabs used to secure this tank are sold separately.

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

This fuel tank assembly stores fuel and sends it to the engine on compatible trimmers, tillers, and edgers, it includes the tank, fuel cap, and fuel lines, replace it if the tank is cracked or the lines are worn and leaking, drain the fuel and let the engine cool before repair, check the equipment model before ordering.

This replacement fuel tank assembly is a high quality item that is specially produced for Shindaiwa lawn and garden equipment. It is designed to hold the fuel that is needed for the internal combustion engine. It is made from durable plastic and it includes the fuel tank, fuel lines with a fuel filter and the cap. Please note hardware to secure this fuel tank is not included it is sold separately.

This high quality OEM sourced replacement fuel tank is specially made for use with Echo gas powered string trimmers and brush cutters. It is used to hold the fuel that is needed for the engine. One durable plastic tank is included per order, please note the cap, fuel lines and the hardware to secure the tank are all sold separately.

This is a high quality OEM supplied replacement fuel tank that is designed for Husqvarna trimmers, edgers and brush cutters. This assembly is made from durable plastic and it includes the tank, fuel lines, fuel filter, fuel cap with a retainer and the isolator pads. Its purpose is to hold the fuel that is used by the engine. You will need a torx screwdriver to complete this repair.

This is an original Shindaiwa replacement part manufactured for use with trimmers, and brush cutters. This hard plastic fuel tank is the fix for damage or cracks to the original fuel tank. Replacing just the tank is less expensive than replacing the whole assembly. The tank does not include the lid or bumpers, and is sold individually.